× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Add to you start up program, chglind ....

Change the line description now to online at IPL *NO.  You can make that
change with it live.

As to performance increase, that depends on you network traffic.  BUT at
10M most switches are only half duplex so make sure you can run 100M
Full duplex on the hubs / switches as well as the adapter card.  Also
make sure the AS400 is plugged into a switch, not a hub.  Big difference
will be see there. 


Christopher Bipes
Information Services Director
CrossCheck, Inc.


-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Don Cavaiani
Sent: Thursday, June 01, 2006 7:10 AM
To: Midrange Systems Technical Discussion
Subject: TCP/IP tuning

I see that my Line Description for my Ethernet adapter is set to Half
Duplex.  I as using unmanaged Hubs/switches which will adjust to the
AS/400 settings.  Will it be a noticeable performance improvement to
switch that to Full Duplex?  It looks like all LAN users will need to
off of the AS/400 system as TCP/IP must be stopped before this parameter
may be changed.


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.