Re: SRC Help - D100 C0FF

You might want to talk to Powerware, too - seems I remember a replacement for 
the card that talks to the iSeries in the 9125.

-------------- Original message -------------- 
From: "James H H Lampert" <jamesl@xxxxxxxxxxx> 

> "Walden H. Leverich" wrote: 
> > Looks like the UPS is incorrectly telling the iSeries 
> > to die. 
> 
> That would be bad. (In the same sense as "don't cross the 
> streams.") 
> 
> If you can't get your UPS talking to your 400 in a civil 
> tone of voice, somewhere, I've got a schematic for a 
> little widget that plugs into your 400's UPS socket on one 
> end, and into a "wall-wart" plugged into an UNprotected 
> socket at the other end, that will tell the 400 when 
> there's a genuine power failure. Email me privately, and 
> mention "UPS widget" in the subject line, if you're 
> interested, and I'll see what I can dig up. 
> 
> This widget, of course, assumes that the UPS socket 
> pinouts on your 400 are not significantly different from 
> those on the back of a 200, 40s, 170, or 510 (or in an 
> alternate version, a D02). 
> 
> -- 
> JHHL 
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list 
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx 
> To subscribe, unsubscribe, or change list options, 
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l 
> or email: MIDRANGE-L-request@xxxxxxxxxxxx 
> Before posting, please take a moment to review the archives 
> at http://archive.midrange.com/midrange-l. 
>