RE: Upgrading to new firmware thru HMC and CUM set backup strategy.

Actually we are on 01SF225 but I don't think it makes a difference.  I
suppose I'll just go ahead and do my initial SAVSYS before I do the
Firmware upgrade.  SAVSYS on Dev. Partition, SAVSYS on Prod, bring down
partitions, upgrade firmware, cycle the system, CUM set on Dev, CUM set
on Prod, SAVSYS on Prod, SAVSYS on Dev.  Piece of cake.

-----Original Message-----
From: midrange-l-bounces+jwallroff=foundation.nebraska.edu@xxxxxxxxxxxx
[mailto:midrange-l-bounces+jwallroff=foundation.nebraska.edu@xxxxxxxxxxx
m] On Behalf Of Pete Massiello
Sent: Thursday, December 15, 2005 11:07 PM
To: Midrange Systems Technical Discussion
Cc: midrange-l@xxxxxxxxxxxx
Subject: Re: Upgrading to new firmware thru HMC and CUM set backup
strategy.

When updating the firmware on the FSP from the HMC there really isn't
anything to be backing up. I assume you are on 01SF230 and upgrading to
01SF235, which will require an Cycle of the FSP, meaning that all
partitions will need to be down when this happens.

Pete

 ---------------------------- Original Message
----------------------------
Subject: Upgrading to new firmware thru HMC and CUM set backup strategy.
From:    "John Wallroff" <JWALLROFF@xxxxxxxxxxxxxxxxxxxxxxx>
Date:    Thu, December 15, 2005 4:46 pm
To:      midrange-l@xxxxxxxxxxxx
------------------------------------------------------------------------
--

> I've just upgraded our HMC for our 9406-520 to V5R1.  Now I need to
> upgrade the Firmware to 01SF235 and then install the latest CUM set.
My
> question is, what is the best backup strategy in this situation.
> Normally before we had the HMC I did a SAVSYS 21 before and after the
> CUM set, now I'm not sure what I should do before the Firmware
upgrade.
>
>
>
> Thanks.
>
>
>
> John C. Wallroff
> Senior Programmer/Analyst
> IBM Certified AS/400 Programmer
> UNIVERSITY OF NE FOUNDATION
> 1010 Lincoln Mall, Suite 300
> Lincoln, NE 68508-2886
> (402) 472-0109
> jwallroff@xxxxxxxxxxxxxxxxxxxxxxx
> <mailto:jwallroff@xxxxxxxxxxxxxxxxxxxxxxx>
>
>
>
>
>
> --
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>