|
I will verify this, Thanks John -----Original Message----- From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark Keller Sent: Friday, September 02, 2005 12:02 PM To: 'Midrange Systems Technical Discussion' Subject: RE: Problem mapping a drive Mixed Case Passwords. This threw me for a loop. I can sign into windows using my mixed case password, but when I open my mapped drive to the ifs, I have to enter my password in all caps. -----Original Message----- From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx]On Behalf Of Ingvaldson, Scott Sent: Friday, September 02, 2005 8:53 AM To: midrange-l@xxxxxxxxxxxx Subject: RE: Problem mapping a drive We had multiple problems mapping a drive recently on XP. 1.) If the prompt for the User Name is domain qualified (i.e. domain name/User Name) remove the domain name. The clue here is that the iSeries profile will not be getting disabled by invalid signon attempts. 2.) If the iSeries and Windows profiles match, then the passwords must match also. I recommend all lower case, don't even try mixed case passwords. (Mixed case passwords may work if your sysval QPWDLVL is 2.) 3.) Check the NetServer Domain name in iNav at your system > Network > Servers > TCP/IP > iSeries NetServer > Properties. On ours this is our Windows domain name. Regards, Scott Ingvaldson iSeries System Administrator GuideOne Insurance Group -----Original Message----- date: Fri, 2 Sep 2005 11:04:41 -0400 from: "Allen" <rallen@xxxxxxxxxxx> subject: Problem mapping a drive We have many customers that will assist with mapping their drives, but we have encountered one customer that we cannot get a drive mapped on their system They are running Windows XP OS400 V5R2 When mapping a drive to a directory in the IFS the users enter their iSeries User Id and Password The screen re-appears and prompts for User Name and password. We have done a CHGUSRPRF to make sure the User profile is not disabled We have tried several different User profiles including QSECOFR We have checked the authorities on the IFS root (temporarily set *PUBLIC Data Authority = *RWX Object Authority= *ALL) not other Users We have checked the authorities on the directory in the IFS root (temporarily set *PUBLIC Data Authority = *RWX Object Authority= *ALL) not other Users We have stopped NetServer and restarted NetServer then check messages in QSYSOPR to verify the NetServer Name was correct We have attempted to map using the iSeries IP Address, System Name (with and without leading Q), NetServer Name Am I missing something, ANY suggestions would be greatly appreciated John
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.