× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Our terminal type is 3488 info window which uses an external monitor.

On Fri, 01 Apr 2005 07:47:19 -0800, Keith Carpenter wrote
> That leaves the address (switch setting) which must also be 0.
> 
> If you check the device description for your terminal (ie. dspdevd 
> dsp01), it should read...
> Port number  . . . . . . . . . . . :   0
> Switch setting . . . . . . . . . . :   0
> 
> Most terminals no longer use switches to set the twinax address. 
> Instead, they are configured in software.  Typically you power the 
> terminal up with the space bar depressed.  If you're not sure, post 
> the make/model of your terminal.
> 
> Keith
> 
> dpalme@xxxxxxxxxxx wrote:
> > We have it set to port 0 on the first and only twinax controller.
> > 
> > 
> > On Thu, 31 Mar 2005 20:03:16 -0800, Keith Carpenter wrote
> > 
> >>For a twinax terminal to be a "console" it must be set to address 0 
> >>and be on port 0 of the first twinax controller.  Anything else will 
> >>*only* work when the OS is running (after IPL).
> >>
> >>dpalme@xxxxxxxxxxx wrote:
> >>
> >>>I was working from the console, our console is connected via twinax and 
> > 
> > with 
> > 
> >>>a normal IPL it loads fine, and we can log in from the console with no 
> >>>problem, perform normal everyday routines, it is only when attempting a 
> > 
> > BM 
> > 
> >>>that it fails.
> >>>
> >>>The console is connected and powered on
> >>>
> >>>
> >>
> >>-- 
> >>This is the Midrange Systems Technical Discussion (MIDRANGE-L) 
> >>mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To 
> >>subscribe, unsubscribe, or change list options, visit: 
> >>http://lists.midrange.com/mailman/listinfo/midrange-l or email: 
> >>MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment 
> >>to review the archives at http://archive.midrange.com/midrange-l.
> > 
> > 
> > 
> > --
> > Open WebMail Project (http://openwebmail.org)
> > 
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) 
> mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To 
> subscribe, unsubscribe, or change list options, visit: 
> http://lists.midrange.com/mailman/listinfo/midrange-l or email: 
> MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment 
> to review the archives at http://archive.midrange.com/midrange-l.


--
Open WebMail Project (http://openwebmail.org)


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.