Re: ftp problems pc to i5 at v5r3

["Jim Franz" <franz400@xxxxxxxxxxxx>]

i have tried running directly from cmd prompt - same hanging on "put".
i do have "local" scripts running with same profile & jobd working ok.
this is only "remote", from my pc. i shutdown zone alarm (which always
prompted me to allow ftp & if i said yes it would work (although lately
ZA no longer prompts me to log on - but i have shut off).
so far network admin says firewall not changed. It's a big deal to trace
this thru
network - i am contract, net admin is contracted, firewall admin is
"managed" by
isp...) will trace i5 side first.
Rob - yes I did load this machine via savrst - tape drives were not
compatible
and company never got v5r1 or 2 for old server before upgrade agreement
expired). it went "fairly" smooth.
jim
----- Original Message ----- 
From: <ron_adams@xxxxxxxxxxxxxx>
To: "Midrange Systems Technical Discussion" <midrange-l@xxxxxxxxxxxx>
Sent: Friday, February 11, 2005 9:15 AM
Subject: Re: ftp problems pc to i5 at v5r3


> Is the machine local to you? Have you checked to make sure there are no
> firewalls in place that might be blocking you?
> I had a similar issue once. It would allow me to logon, however the
> transfer requests would just timeout. Turns out, the firewall wasn't open
> on both sides to allow FTP traffic.
>
> Thanks,
>
> Ron Adams
> Information Technology Group
> Crane Valves
> 9200 New Trails Dr. Suite 200
> The Woodlands, TX 77385
>
>
>
>
>
>
> "Jim Franz" <franz400@xxxxxxxxxxxx>
> Sent by: midrange-l-bounces@xxxxxxxxxxxx
> 02/11/2005 07:09 AM
> Please respond to Midrange Systems Technical Discussion
>
>
>         To:     <MIDRANGE-L@xxxxxxxxxxxx>
>         cc:
>         Subject:        ftp problems pc to i5 at v5r3
>
>
> Recent upgrade from v4r5 S10 to vr5r3 model 520.
> FTP from i5 to unix servers daily work fine.
> FTP from pc (dos command prompt) to i5 hangs.
> Get logged on, but does not start sending.
> After login (have run this script for years):
> cd MYLIB
> put C:\SCI\PXMIT.txt HOMEBU (replace
> quote rcmd CAll HOMUPDC
> I can tell on some attempts, CALL does execute....
> Have cume & hipers as of 3 weeks ago.
> Any ideas, or how to debug this? I have changed
> the job log for ftp jobs to 4  00   *seclvl. No ftp exit pgm running.
> jim franz
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
> list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>
>
> -- 
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.
>
>