RE: Problems in iSeries Navigator -- MIDRANGE-L

Maybe now I understand what Scott was saying.

Chuck, try right clicking on that iSeries.  At the bottom pick Properties. 
 Connection tab.  Select "Prompt every time".  Does that allow you to pick 
a different user?

Rob Berendt
-- 
Group Dekko Services, LLC
Dept 01.073
PO Box 2000
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





"Chuck Lewis" <clewis@xxxxxxxxxx> 
Sent by: midrange-l-bounces+rob=dekko.com@xxxxxxxxxxxx
03/18/2004 09:28 AM
Please respond to
Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>


To
"'Midrange Systems Technical Discussion'" <midrange-l@xxxxxxxxxxxx>
cc

Subject
RE: Problems in iSeries Navigator






Hi Scott,

Opt  Subsystem/Job  User        Type  CPU %  Function        Status 
        QYPSJSVR     QYPSJSVR    BCH      .0  PGM-QYPSJSVR     SIGW 
        QYPSSRV      QSYS        BCH      .0  PGM-QYPSSRV      DEQW 

And I've tried this with QSECOFR but I had previously tried it with my
profile (and it seems that once you get "connected" you aren't prompted
again...). Maybe I need to reboot ?

Thanks,

Chuck

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Ingvaldson, Scott
Sent: Thursday, March 18, 2004 9:00 AM
To: 'midrange-l@xxxxxxxxxxxx'
Subject: RE: Problems in iSeries Navigator

When you do a WRKACTJOB JOB(QYPS*) do you see two or more jobs? You should
see QYPSJSVR and QYPSSRV at least, and maybe QYPSPFRCOL.  QYPSJSVR is the
Management Central Java server and requires the use of a profile with
*ALLOBJ authority, the default is QSECOFR.  IIRC QSECOFR must be enabled 
and
have a valid, non-expired password for this job to run.  There is a
procedure for specifying an alternate profile for this job, but I have not
tried this.

Hope this helps,

Scott Ingvaldson
AS/400 System Administrator
GuideOne Insurance Group

-----Original Message-----
date: Wed, 17 Mar 2004 16:23:04 -0500
from: "Chuck Lewis" <clewis@xxxxxxxxxx>
subject: Problems in iSeries Navigator

Hi Folks,

 
Have not done a whole lot with iSeries Navigator; been buried. We went 
from
a 620 running V4R5 to an 810 running V5R2 in September so previous to that
there wasn't much point. Well I am very interested in some of the stuff in
it now and am trying to use it. I get prompted to login and do that with a
profile containing *IOSYSCFG but I get an error box:


Unable to complete the connection to central system '172.16.10.11'

 
So am I missing something ? Is there some service that needs to be started 
?
 

In the message "details" tab  it says:

 
To start the Management Central servers (QYPSSRV and QYPSJSVR) on an 
iSeries
server, you must have authority to use Management Central on that system.
Authority to start the servers requires *USE authority to the Start TCP/IP
Server (STRTCPSVR) command. The Management Central servers usually run 
under
the security officer (QSECOFR) profile.  If this profile is disabled for 
any
reason, the servers will not start.

 
1          In iSeries Navigator, expand My Connections (or your active
environment).

2          Expand the iSeries server that you are using as your central
system.

3          Expand Network.

4          Expand Servers.

5          Select TCP/IP.

6          Right-click Management Central and select Start.

 
You can also start the Management Central servers by issuing this command
from any OS/400 command line: STRTCPSVR SERVER(*MGTC).

 
Well I do that up to step # 6 and when I right-click Management Central at
the top of the tree there is no Start option.


So I use the OS/400 command and get:
 

Management Central Server job was not submitted.  Reason code 01. 

Management Central Server job was not submitted.  Reason code 01. 

MGTC server not started. 

STRTCPSVR completed successfully; however errors occurred. 

 
And reason code 01 is 01 - The QYPSSRV server job is already running.

 
So I guess it is already running ?
 

Thanks !
 

Chuck
 
This message and accompanying documents are covered by the Electronic
Communications Privacy Act, 18 U.S.C. §§ 2510-2521, and contains 
information
intended for the specified individual(s) only. This information is
confidential. If you are not the intended recipient or an agent 
responsible
for delivering it to the intended recipient, you are hereby notified that
you have received this document in error and that any review, 
dissemination,
copying, or the taking of any action based on the contents of this
information is strictly prohibited. If you have received this 
communication
in error, please notify us immediately by e-mail, and delete the original
message.

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.



_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.