Re: Remote Printer - What do I ask Network guy to check on his side?

Do you have the remote printer queue name correct?

----- Original Message ----- 
From: <Bonnie_Lokenvitz@xxxxxxxxxxxxxx>
To: <midrange-l@xxxxxxxxxxxx>
Sent: Tuesday, March 09, 2004 7:18 AM
Subject: Remote Printer - What do I ask Network guy to check on his side?


>
>
> Still at V4R5 and still operator-less.
>
> We have several Intermec 3400's setup as remote writers.
> CRTOUTQ with connection type *IP and the IP address.  Added another
> yesterday.
>
> The As/400 print stays in send mode and this error appears in QSPL  job:
>
> TCP3436
> Message . . . . :   No response from remote host system within open
> time-out.
> Cause . . . . . :   An open request was sent to a remote host system, but
> that
>   host system did not respond to the request before the open time-out
> expired.
>   This may be due to the fact that the TCP/IP services are not currently
>
>   available on the remote host system.
>
>
> The network admin says he can ping it so there's no problem.  VFYTCPCNN
> from AS/400 also works.  Where else should we be looking?
>
> Thanks much,
> Bonnie Lokenvitz
> Engineered Polymers
>
>
> _______________________________________________
> This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
> To post a message email: MIDRANGE-L@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/midrange-l
> or email: MIDRANGE-L-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/midrange-l.