RE: Tape from archived

I'm doing an upgrade from an F35 to a 720 in a couple of weeks (data 
conversion only). I'll check to see if they have the right kind of 
cartridge. How urgent is your need?


Paul Nelson
Arbor Solutions, Inc.
708-670-6978  Cell
pnelson@xxxxxxxxxx

"Always do right. This will gratify some people and astonish the rest." 
Samuel L. Clemens  (Mark Twain)




Lurton Keel <LKeel@xxxxxxxxxxxxxx>
Sent by: midrange-l-bounces@xxxxxxxxxxxx
10/22/2003 07:41 AM
Please respond to Midrange Systems Technical Discussion

 
        To:     "'Midrange Systems Technical Discussion'" 
<midrange-l@xxxxxxxxxxxx>
        cc: 
        Subject:        RE: Tape from archived


This is what we get when we do a DSPTAP on our 6386 tape drive.
 

 Message ID . . . . . . :   CPF6772

 Date sent  . . . . . . :   10/22/03      Time sent  . . . . . . :
07:39:19 
 

 Message . . . . :   Volume on device TAP01 cannot be processed.

 

 Cause . . . . . :   One of the following occurred:

     -- The volume loaded on device TAP01 cannot be processed, because the

   format or density is not correct.

     -- The tape may be a new or blank tape that has not been initialized.

     -- The tape may not have an IBM-standard labeled sequence if the 
volume
i
   a 1/4 inch cartridge tape or an 8 millimeter cartridge tape, and the

   cartridge was created on a system other than an AS/400 system.

     -- The tape may contain data which was compacted and device TAP01 can
not
   read compacted data if the device is a 1/2 inch cartridge tape unit.

     -- The operator loaded a different volume during file processing.

     -- The tape unit needs cleaning

 -----Original Message-----
From:            pnelson@xxxxxxxxxx [mailto:pnelson@xxxxxxxxxx] 
Sent:            Tuesday, October 21, 2003 11:47 AM
To:              Midrange Systems Technical Discussion
Subject:                 Re: Tape from archived

Can you do a dsptap?

_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing 
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.