|
Tim, >From Ricoh's site, that printer uses a "Fiery EB-70 Print Controller". You might find something more specific. It seems this controller might respond to SNMP driver, so perhaps: http://www-912.ibm.com/s_dir/slkbase.NSF/acf2ee1e9d64b16e8625680b00020389/94 e73364f979e388862569030071c398?OpenDocument&ExpandSection=3,7,6,5&Highlight= 0,fiery#_Section3 I did run across this in another document, too: <snip> Osicom, Ricoh, and Savin print servers support bidirectional PJL. However, the Base Port Number must be changed to 9099 on the NIC card or print server. Once this is done, the *LAN 3812 PJL device description can be set up to use port 9100 on the Osicom, Ricoh and Savin internal NIC cards, or ports 9100, 9101 and 9102 for external Osicom NetPrint print servers (depending on which parallel port is being used). The Base Port Number can be changed using an Internet browser (such as Microsoft Internet Explorer or Netscape Navigator) using the Web interface for the print server. For example, link to "http://38.242.136.182/" where 38.242.136.182 is the IP address for the print server. <snip> Eric DeLong Sally Beauty Company MIS-Project Manager (BSG) 940-898-7863 or ext. 1863 -----Original Message----- From: Hatzenbeler, Tim [mailto:thatzenbeler@xxxxxxxxxxxxx] Sent: Thursday, April 10, 2003 11:53 AM To: 'Midrange Systems Technical Discussion' Subject: Printer Help...Ricoh Aficio 700 Setup.. Printer Help...Ricoh Aficio 700 Setup.. I was wondering if any one, might have a 'wrkdevd' config for this printer... It's connected directly into our IP network, and for some reason, I can print to it, using a rmtprtwtr, but when I tried to give it, it's own devd, it doesn't seem to work, I get a msgw, that can't be answered with a reply... something about, not being availabe.. and the device is varied on, and I did strprtwtr, and it is sitting with a rls/wtr status... This printer is the ricoh photocopier model... Thanks, tim This e-mail message, including any attachments, is for the sole use of the intended recipient(s) and may contain confidential or privileged information. Any unauthorized review, use, disclosure or distribution is prohibited. If you are not the intended recipient, please contact the sender by reply e-mail and destroy the message. _______________________________________________ This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options, visit: http://lists.midrange.com/mailman/listinfo/midrange-l or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.