× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi Rick,

When you restart a spool file from a known point in the file (not page 1),
the OS/400 HPT function believes that the printer already has the correct
report format resident within itself and that it doesn't need to have a
reminder sent to it. As you mention, recovery from certain error conditions
at the printer will cause it to flush the known format for the job it was
processing, which can cause loss of spool file attributes when it starts
printing again.

To resolve the issue, you should place the active spool file on hold and
then stop and start the OS/400 writer. You can now release the held job,
specifying to start printing from the page where the error occurred, and the
format will be correct.

HTH

Best Regards,

/Paul
--
Paul Tykodi
National Product Manager
Print 4Sight Inc.

p: 603-431-0606 x115
f: 603-436-6432
E-mail: p.tykodi@print4sight.com
www.print4sight.com

Special Note: On November 30th, 2002, Print 4Sight Inc. acquired the
business assets and business activity of Intermate US Inc.

Print 4Sight Inc. as an official North American distributor will continue to
sell and support Intermate and Praim Printing products from current offices
in Portsmouth, NH, USA.

>Date: Fri, 31 Jan 2003 08:35:04 -0500
>From: "Rick Nardone" <rick@midtel.net>
>Subject: Restarting Duplexed AFPDS Spool Does not Duplex
>
>Basic Background: Printing an AFPDS spool file with multiple customer
>invoices to Ethernet attached laser printer.  Sometimes necessary to
restart
>at a specific downstream page number in that spool file(paper jams, etc).
>IP attached printer, Host Print Transform.
>
>If re-starting a large spool file at a specific page number, duplexing
>parameter on spool file is ignored.  It is there in the spool file
>attribute, but simplex printing results.
>
>If re-starting from page 1 of the spool file duplexing DOES work.
>
>We were relying on the duplex(*yes) spool file parameter via CRTPRTF and
>thought that perhaps the duplexing parameter used in this manner is somehow
>conveyed in the first page of the spool file only?
>
>So, we changed to DDS keyword DUPLEX(*YES) in the record format for the
>first page of each invoice and still restarting beyond page 1 results in a
>simplex printing.
>
>We are running v5r1, v5r2 upgrade in a few weeks.  Researched/loaded PTFs
>that might solve this(nothing specific found) with no improvement.
>
>IPDS gotcha? Hope not.  Thus far this new process is running far better
with
>HPT than IPDS..
>
>TIA...


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.