RE: SNA Connection - need MAC Adress Ethernet to Token Ring format conversion

Philipp,

Once you have managed to resolve your problems and all is well I would be
very grateful if you could give me a quick run down on potential pitfalls in
conversion.

We are planning to switch from token ring to Ethernet very soon.  Other
AS400s in our company offices abroad are all on Ethernet.  We were the only
site to be token ring.  We use both SNA and TCPIP.

Thanks for the link Brian!

Thanks,

Jenny

-----Original Message-----
From: Eduard v.d. Braken [mailto:e.vd.braken@hccnet.nl]
Sent: 06 June 2002 11:31
To: MIDRANGE-L@midrange.com
Subject: Re: SNA Connection - need MAC Adress Ethernet to Token Ring
format conversion


Philipp

The converted adress is the same, you are use a special combinations which
is the same for ethernet and tokenring.

I used the old (dos) reverse program, once part of pc-support

Groetjes (Greetings)
====================================================
Naam:     Eduard van den Braken
e-mail:   E.vd.Braken@HccNet.nl
====================================================
----- Original Message -----
From: "Philipp Rusch" <Philipp.Rusch@rusch-edv.de>
To: "Midrange List" <MIDRANGE-L@midrange.com>
Sent: Thursday, June 06, 2002 12:20 PM
Subject: SNA Connection - need MAC Adress Ethernet to Token Ring format
conversion


Hello all,
Anybody out there still having the ClientAccess Version with
Netsoft-Router ? (Version <= 3.2)
We are trying to migrate an OS/2 Warp-Server from Token-Ring
SNA connection to Ethernet and ran into problems.
I am not on site and trying to help via phone.


Would someone "convert" the following mac-address for me ?

42003C002481 -- >  ??

You can do so by configuring a test-connection with DLC-protocol
then you type in my mac address above and select to convert
the address (there is a checkbox for that) then the converted address
is shown in a second field in that dialog box.

Thanks a lot in advance.
Regards from germany,
Mit freundlichen Grüßen, Philipp Rusch


 -----------------------------------------------------------------
| EDV Beratung Rusch          EDP Consulting Rusch                |
| Philipp Rusch               IBM Certified AS/400 Specialist     |
| Am Errlich 9                WWW   : http://www.rusch-edv.de/    |
| D-61191 Rosbach,            Mailto: Philipp.Rusch@rusch-edv.de  |
| Germany                                                         |
| Phone: (+49) 6003 3972      Mobile : (+49) 172 89 86 230        |
| Fax  : (+49) 6003 3795                                          |
|                                                                 |
 -----------------------------------------------------------------

Diese E-Mail enthält vertrauliche und/oder rechtlich geschützte
Informationen. Wenn Sie nicht der richtige Adressat sind oder diese
E-Mail irrtümlich erhalten haben, informieren Sie bitte den Absender
und vernichten Sie diese E-Mail. Das unerlaubte Kopieren sowie die
unbefugte Weitergabe dieser E-Mail ist nicht gestattet.

This e-mail may contain confidential and/or privileged information.
If you are not the intended recipient (or have received this e-mail
in error) please notify the sender and destroy this e-mail. Any
unauthorised copying, disclosure or distribution of the material
in this e-mail is strictly forbidden.




_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.




_______________________________________________
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
or email: MIDRANGE-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.