Re: Really weird printer problem

Hi Albert,

If port 2 switch setting 1 has been defined as a secondary system console,
you will get this message. The system will accept the device name (PRT01)
but it will try to treat the device as a display when you try to vary it on.

Good luck!

Best Regards,

/Paul
--
Paul Tykodi
Director of Technical Services
LCI-Intermate US, Inc.

p: 603.431.0606 x115
f: 603.436.6432
paul@intermate-us.com
www.intermate.com

> -----Original Message-----
        > From: York, Albert [mailto:albert.york@nissan-usa.com]
        > Sent: Thursday, September 27, 2001 11:44 AM
        > To: 'MIDRANGE-L@midrange.com'
        > Subject: Really weird printer problem
        >
        >
        > I am having a problem with a printer. When I try to vary it
        > on I get this
        > message:
        >
        >  Message ID . . . . . . :   CPF1189       Severity . . . . .
        > . . :   70
        >
        >  Message type . . . . . :   Information
        >
        >  Date sent  . . . . . . :   09/27/01      Time sent  . . . . . . :
        > 13:33:49
        >
        >
        >  Message . . . . :   Subsystem QCTL varied off work station PRT01.
        >
        >  Cause . . . . . :   Subsystem QCTL received CPF5257 while using
file
        > QDSIGNON
        >    in library QSYS record format SIGNON.  As a result of this
        > error, work
        >
        >    station PRT01 was varied off by the subsystem.
        >
        >  Recovery  . . . :   Correct the problem that is causing the
        > CPF5257 error.
        >
        >    Display the job log of the subsystem for more information.
        >  After the
        >
        >    problem has been corrected, vary the device on (VRYCFG
        > command).  The
        >
        >    subsystem will then allocate the work station when it
        > becomes available.
        >
        >
        >
        >
        > It is definitely a printer. Here is the device description:
        >
        > Device description . . . . . . . . :   PRT01
        >
        >  Option . . . . . . . . . . . . . . :   *BASIC
        >
        >  Category of device . . . . . . . . :   *PRT
        >
        >
        >
        >  Device class . . . . . . . . . . . :   *LCL
        >
        >  Device type  . . . . . . . . . . . :   4214
        >
        >  Device model . . . . . . . . . . . :   2
        >
        >  Advanced function printing . . . . :   *NO
        >
        >  Port number  . . . . . . . . . . . :   2
        >
        >  Switch setting . . . . . . . . . . :   1
        >
        >  Online at IPL  . . . . . . . . . . :   *YES
        >
        >  Attached controller  . . . . . . . :   CTL01
        >
        >  Form feed  . . . . . . . . . . . . :   *CONT
        >
        >  Separator drawer . . . . . . . . . :   *FILE
        >
        >  Separator program  . . . . . . . . :   *NONE
        >
        >  Printer error message  . . . . . . :   *INQ
        >
        >
        >
        > Anybody got any ideas?
        >
        > Thanks,
        >
        > Albert