Re: Negative response code is 1005012D

Dean,

in the 5494 functional reference manual, sc30-3533-03, page 12-32

1005-012D - Extended attribute type not valid.

translation: a display fld contains non display data and a shortcoming in
the 5250 data stream design causes the display data to be interpreted as a
display instruction.

hth,

Steve Richter

-----Original Message-----
From: DWard@burswood.com.au <DWard@burswood.com.au>
To: midrange-l@midrange.com <midrange-l@midrange.com>
Date: Thursday, August 23, 2001 12:49 AM
Subject: Negative response code is 1005012D


>
>This is a multi-part message in MIME format.
>--
>
>Hi all,
>
>
>I am experiencing a problem with a subfile.  I can see the subfile load,
>than display briefly - then a message breaks saying "Permanent I/O error
>occurred in file PR544D"  (PR544D being my display file) - when I look at
>the message in says (Data sent to device ITSI4591 not valid.  "Negative
>response code is 1005012D.")  I have been able to determine that the
>problem only occurs for a certain set of data - being one account - I can
>access any other account using the same display and program and the subfile
>is fine.  So I am assuming that there is something wrong with the data.  I
>have accessed the offending records using DFU and rekeyed over them to see
>if there was some kind of character in them that was not acceptable but
>still have had no luck.
>
>Upon reading through the midrange archives I noticed that this error had
>been reported on the 24th July 2001 but there appears to be no response.
>
>Can anyone offer a solution.
>
>
>Thanks for any help.
>
>
>Dean Ward
>E-mail:  dward@burswood.com.au
>Phone: 61-08-9362-7017
>
>
>--
>***************************************************************************
****************
>                               Privacy and Confidentiality Notice
>
>The information contained herein and any attachment is intended solely for
the named recipients.
>It may contain privileged confidential information.
>If you are not an intended recipient, please delete the message and any
attachments and notify the sender of mis-delivery:
>Any use or disclosure of the contents of either is unauthorised and may be
unlawful.
>All liability for viruses is excluded to the fullest extent permitted by
law.
>_______________________________________________
>This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
>To post a message email: MIDRANGE-L@midrange.com
>To subscribe, unsubscribe, or change list options,
>visit: http://lists.midrange.com/cgi-bin/listinfo/midrange-l
>or email: MIDRANGE-L-request@midrange.com
>
>