RE: Does Netserver do this???

Easy Dan, using NetServer on your 400, you can install Client Access 
directly from the 400 without the CD.
Catch 22 !  ;-)

Yes, you need OpsNav, so install CA Express from the Client Access Family 
for Windows CD, or if you have some CA installed but not Ops Nav run IBM 
Client Access Express/Selective Setup.

You can actually configure basic NetServer, including a guest profile (but 
not file shares), without OpsNav - from a green screen.
Read informational APAR's II11239 & II11240 (SNDPTFORD II11239  ...etc. - 
or read online).
To start & end manually, on V4R4 (maybe V4R3) and higher, just use 
STRTCPSVR *NETSVR or ENDTCPSVR *NETSVR.
You can set the Autostart option by using UPDDTA QATOCSTART  (file is in 
QUSRSYS) and change Autostart (use capital *NO or *YES).

...Neil





D.BALE@handleman.com
Sent by: owner-midrange-l@midrange.com
2001/01/26 12:46
Please respond to MIDRANGE-L

 
        To:     MIDRANGE-L@midrange.com
        cc: 
        Subject:        RE: Does Netserver do this???


So I need Operations Navigator to configure Netserver?  How do I install 
Ops
Nav?  I.e., is there a CD-ROM?  Is it on the CA disk?  What if you don't 
order
CA for your system?  Will you still get the CD-ROM?

Dan Bale
IT - AS/400
Handleman Company
248-362-4400  Ext. 4952

-------------------------- Original Message --------------------------
On the AS400 you need to configure and start NetServer.  You will be
defining shares much like you do on Wintel boxes.  You can also setup 
public
access and a guest profile for people that do not have signons to your
AS400.  Netserver uses the same UserID/Password that you use to logon to 
the
PC.  If they match the AS400 signon, no second signon window.  If the user
ids are the same and not the password, you will be prompt for the 
password,
not user id.  If there is no match and a guest profile is setup, it will 
use
the guest profile with no logon window.

By the way, to configure Netserver you use Ops Nav, Network, Servers,
TCP/IP.  You can define shares there or from the file system.  Object
security for shares is handled under the file system, not Netserver.


Christopher K. Bipes             mailto:ChrisB@Cross-Check.com
Sr. Programmer/Analyst           mailto:Chris_Bipes@Yahoo.com
CrossCheck, Inc.                 http://www.cross-check.com
6119 State Farm Drive            Phone: 707 586-0551 x 1102
Rohnert Park CA  94928           Fax: 707 586-1884

If consistency is the hobgoblin of little minds, only geniuses work here.
Karen Herbelin - Readers Digest 3/2000

-----Original Message-----
From: D.BALE@handleman.com [mailto:D.BALE@handleman.com]
Sent: Friday, January 26, 2001 7:51 AM
To: MIDRANGE-L@midrange.com
Subject: Does Netserver do this???


We've got a v4r4 system and want to be able to map AS/400 folders to a 
Win9x
PC (so we can access them via a separate drive letter in Windows 
Explorer).
My only experience to do this is to install Client Access.  But we don't
wish
to do that in this situation.  I believe I've heard that Netserver has 
this
function, and that it is included as part of the OS in v4r4.

If true, how does one set up a PC to do this?  Is it similar to how I 
would
do
it with CA installed?  I.e., open Windows Explorer, choose Map a network
drive
under the Tools tab?  How does one make the PC "see" the AS/400?

What if there are multiple AS/400s you want to access?  Any additional
considerations?

Is there still a user signon/password required?

Dan Bale
IT - AS/400
Handleman Company




+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---