Re: Console(ation) sought !

Jon.Paris@halinfo.it wrote:
> 
> Hopefully one of you hardware gurus can advise this software weenie on this.
> 

Jon,

  First off, the hardware is dead flat reliable, it's the software that is 
ALWAYS
at fault!   :-))

  Do you have a Twinax controller on the 170?  If you do I'll happlily send you
either or both of a twinax emulator card (IBM Brand) or a Twinax terminal (OK
it's not new nor is it a 5251!) and a cable at no cost, just email me your UPS
number! 

  If you don't have a twinax controller then you are stuck a bit.  Certainly you
can config a PPP line to connect to but alas TCP/IP must still be alive for that
to work.  Now you could code a program that sleeps for x amount of time and when
that timer hits zero it ends and restarts TCP/IP!  That way if you get knocked
off you just wait for the timer to trip!  You might want to have a simple 
command
to run occasionally that manually resets the timer if you are still on! 
Alternatively you could just set the power schedule to IPL every night (or at
lunch too maybe so you'd only lose 1/2 day max). ;`)

  Seriously Jon, If you were connecting to NT I'd worry!  This is AS/400 land,
however, and machines here run for months and months and months.  And there is
always the white button!

  - Larry

-- 
Larry Bolhuis         |         What if it's True?
Arbor Solutions, Inc  |
(616) 451-2500        |  
(616) 451-2571 -fax   | 
lbolhui@ibm.net       |
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---