RE: TCP/IP printing

I have been struggling with a Xerox printer that won't do AFP.  I can't
configure it as a device because nobody can tell me what port to set it to,
so I've been researching the Remote Outq solution.  Using a remote outq, you
can set the remote print queue to 'raw1' for port 1, 'raw2' for port 2 and
'raw3' for port 3.  I hope this is of some assistance...

Buck Calabro
Aptis; Albany, NY
mailto:Buck.Calabro@aptissoftware.com

> -----Original Message-----
> From: John Cirocco 
> Sent: Wednesday, September 29, 1999 12:16 PM
> To:   midrange-l@midrange.com
> Subject:      TCP/IP printing 
> 
> I am trying to do direct printing using TCP/IP to our HP printers which
> are attached via Jet Direct boxes/cards.
> 
> Everything was going along just peachy when we came across a 2 port jet
> direct box.  Unfortunately you can assign a single address to it.  Now
> how would I configure the 2 AS/400 remote queues when I have only one
> address.  I gotta believe I am not the first to attempt this.
> 
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---