× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: Client Access
  • From: Larry Bolhuis <lbolhui@xxxxxxx>
  • Date: Thu, 21 May 1998 23:04:35 -0400
  • Organization: Arbor Solutions, Inc

Chuck,
> 
> Tim we started using TCP/IP a while back with NT machines and I already had 
>the
> STRTCP command in our startup CL. Once we started using NT I found out that 
>you
> needed STRHOSTSVR also. I know that STRTCP needs to happen  first so I placed
> STRHOSTSVR after it and it didn't work. I moved STRHOSTSVR to the end of the 
>CL
> hoping that this would work (maybe there was a "timing" problem with TCP/IP 
>not
> having time to get fully started...) but this has not worked either.
> 

  You have a timing problem and possibly also a security one.  I place
the STRHOSTSVR at the end of the startup job, and add a DLYJOB command
just prior to the STRHOSTSVR command to allow the TCP/IP stack to
initialize.  Depending on CPU Model between 30 and 60 seconds seems to
work-Longer on smaller systems.  The second issue is that QPGMR must be
authorized to the STRHOSTSVR command since that is the user profile that
runs the startup job.  

  Larry Bolhuis
  Arbor Solutions, Inc
  lbolhui@ibm.net


> 
> Chuck
> 
> +---
> | This is the Midrange System Mailing List!
> | To submit a new message, send your mail to MIDRANGE-L@midrange.com.
> | To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
> | To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
> | Questions should be directed to the list owner/operator: david@midrange.com
> +---
+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To subscribe to this list send email to MIDRANGE-L-SUB@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.