Firewall setup

I attempted to setup a new model 150 on Saturday with a two port IPCS
and the firewall setup.  Interesting that the firewall setup is
performed using a TCP/IP connection, yet on a new 400 with IPCS, you
don't have a TCP/IP connection until you setup the Network server.
Firewall docs list the commands that you can run from green screen
command line, so I ran these commands:

CRTLINxxx (for token internal token ring line)
CRTLINETH (for port 1 of IPCS)
CRTLINETH (for port 2 of IPCS)

ADDTCPIFC (Add TCP interface for unused TCPIP address)

CRTNWSxxx (Create network server type *BASE, reference 3 lines created
earlier, and assign IP addresses to each)

INSTNWSAPP (Install Network Server app for firewall, I could be wrong on
exact command)

Problem is once everything is started, I try to ping the secure port of
the firewall and there is no response.  The docs never told me to add a
TCPIP interface for either of the IP addresses on Port 1 or 2.  Is that
a step that I missed?

I can't use my browser to connect to the firewall either to continue
setup or change configs.

Firewall setup manual is more like a booklet, is it that simple?!?

Thanks.
--
Art Tostaine, Jr.
Creative Computer Associates, Inc.
Parlin, NJ 08859


+---
| This is the Midrange System Mailing List!
| To submit a new message, send your mail to MIDRANGE-L@midrange.com.
| To unsubscribe from this list send email to MIDRANGE-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---