Re: TCP/IP and TELNET

Carl,

        What LPR/LPD client do you run on your machines?  I forwarded a message
to the group asking IBM about using Netware for SAA & HostPrint/400 to
print to the clients.  This resolves a static versus dynamic IP
addressing issue that I have.  That is if the application I outlined
will work.

Danny Mc?

Carl Galgano wrote:
> 
> Scott:
> Using telnet there is no support for a printer, so here are the options:
> 1.  Continue to use the twinax attached printers as is.
> 2.  Use a network attached printers (ie LaserJet 5 w/Jet Direct card), you
> can then assign an IP address to each printer and create an outq on the
> AS400 pointing that IP address.
> 3.  Use printers attached to PC by using an LPD/LPR software on the PC.
> Again you need to create an outq on the AS400 pointing to the IP address of
> the PC.  The LPD software should be started at startup time and will direct
> the spool file to the printer.
> It all works pretty well.
> Let me know if you need any details about any of the above.
> Regards,

-- 

---
Danny Mc?
E-mail:    dcmcques@vantek.net
 or Click: mailto:dcmcques@vantek.net
Web Page:  http://www.vantek.net/pages/dcmcques/index.html

-----BEGIN PGP PUBLIC KEY BLOCK-----
Version: 2.6.2
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=cnWd
-----END PGP PUBLIC KEY BLOCK-----

* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *
* This is the Midrange System Mailing List!  To submit a new message,   *
* send your mail to "MIDRANGE-L@midrange.com".  To unsubscribe from     *
* this list send email to MAJORDOMO@midrange.com and specify            *
* 'unsubscribe MIDRANGE-L' in the body of your message.  Questions      *
* should be directed to the list owner / operator: david@midrange.com   *
* * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * * *