|
midrange.com
Nick,
Nick,
I have a few HP2100 and HP2200 printers on our AS/400. They basically
have the same setup. I took some screen captures of the device
description and the outq setup. The one thing you might want to check
into is the workstation customizing object.
Hope this helps!!!
Device Description for a HP2200
Device description . . . . . . . . : PRTQA
Option . . . . . . . . . . . . . . : *BASIC
Category of device . . . . . . . . : *PRT
Device class . . . . . . . . . . . : *VRT
Device type . . . . . . . . . . . : 3812
Device model . . . . . . . . . . . : 1
Advanced function printing . . . . : *NO
Online at IPL . . . . . . . . . . : *NO
Font:
Identifier . . . . . . . . . . . : 011
Point size . . . . . . . . . . . : *NONE
Form feed . . . . . . . . . . . . : *AUTOCUT
Separator drawer . . . . . . . . . : *FILE
Separator program . . . . . . . . : *NONE
Printer error message . . . . . . : *INQ
Message queue . . . . . . . . . . : *CTLD
Current message queue . . . . . . : QSYSOPR
Library . . . . . . . . . . . . : QSYS
Host print transform . . . . . . . : *NO
Paper source 1 . . . . . . . . . . : *MFRTYPMDL
Paper source 2 . . . . . . . . . . : *MFRTYPMDL
Envelope source . . . . . . . . . : *MFRTYPMDL
ASCII code page 899 support . . . : *NO
Image configuration . . . . . . . : *NONE
Workstation customizing object . . : *NONE
User-defined object . . . . . . . : *NONE
Object type . . . . . . . . . . : *NONE
Output queue . . . . . . . . . . > PRTQA Name
Library . . . . . . . . . . . *LIBL Name, *LIBL, *CURLIB
Maximum spooled file size:
Number of pages . . . . . . . *NONE Number, *SAME, *NONE
Starting time . . . . . . . . Time
Ending time . . . . . . . . . Time
+ for more values
Order of files on queue . . . . *FIFO *SAME, *JOBNBR, *FIFO
Remote system . . . . . . . . . *INTNETADR
Remote printer queue . . . . . . 'raw'
Writers to autostart . . . . . . 1 1-10, *SAME, *NONE
Queue for writer messages . . . QSYSOPR Name, *SAME
Library . . . . . . . . . . . *LIBL Name, *LIBL, *CURLIB
Connection type . . . . . . . . *IP *SAME, *SNA, *IP,
*IPX...
Destination type . . . . . . . . *OTHER *SAME, *OS400,
*OS400V2...
Host print transform . . . . . . *YES *SAME, *YES, *NO
User data transform . . . . . . *SAME Name, *SAME, *NONE
Library . . . . . . . . . . . Name, *LIBL, *CURLIB
Manufacturer type and model . . *HP5SI
Workstation customizing object HP6MOD Name, *SAME, *NONE
Library . . . . . . . . . . . QGPL Name, *LIBL, *CURLIB
Image configuration . . . . . . *NONE *SAME, *NONE,
*IMGA01...
Internet address . . . . . . . . 'xxx.xxx.xxx.xxx'
VM/MVS class . . . . . . . . . . *SAME *SAME, A, B, C, D, E,
F, G...
Forms Control Buffer . . . . . . *SAME Character value,
*NONE...
Destination options . . . . . . *NONE
Print separator page . . . . . . *NO *SAME, *YES, *NO
User defined option . . . . . . *NONE Option, *SAME, *NONE
+ for more values
User defined object:
Object . . . . . . . . . . . . *NONE Name, *SAME, *NONE
Library . . . . . . . . . . Name, *LIBL, *CURLIB
Object type . . . . . . . . . *DTAARA, *DTAQ,
*FILE...
User driver program . . . . . . *NONE Name, *SAME, *NONE
Library . . . . . . . . . . . Name, *LIBL, *CURLIB
Spooled file ASP . . . . . . . . *SYSTEM *SAME, *SYSTEM,
*OUTQASP
Text 'description' . . . . . . . 'Default output queue for printer
PRTQA
'
Rob Newton
MIS Manager
Sunroc LLC
rnewton@xxxxxxxxxx
Phone: (302)678-7800
Fax: (302)678-7809
-----Original Message-----
From: Nick_Radich@xxxxxxxxxxxxxx [mailto:Nick_Radich@xxxxxxxxxxxxxx]
Sent: Tuesday, April 12, 2005 4:15 PM
To: mapics-l@xxxxxxxxxxxx
Subject: Setting up a new printer
Hello everyone,
I know this isn't about MAPICS but, here goes.
I have an HP 2100 printer I am trying to setup on my AS/400. I can't
hook
it up locally, so I am setting it up as a remote, using TCP/IP. Also,
it
is connected to our LAN. When I print something from our network, it
works
fine. When I PING it from the AS400, it pings good.
The problem is, when I set it up by creating a Device Description for
it, I
can get the SPLF to the PND status, but no further (no messages,
nothing).
After I hold by output, and end the Writer/Printer the only printout I
get
is 3 little smiley faces in the top left corner of my paper, 2 are white
and 1 is black.
Here are the parms I am using to set it up with:
CRTDEVPRT devd(ITTEST) devcls(*LAN) type(*IPDS) model(0) lanattach(*IP)
afp(*YES) port(9100) online(*YES) font(011)
formfeed(*autocut) sepdrawer(*FILE) seppgm(*NONE) prterrmsg(*INQ)
msgq(*CTLD) acctmr(170) imgcfg(*NONE) maxpndrqs(6) prtcvt(*YES)
formdf(F1C10110) rmtlocname("my IP address of my printer")
usrdfnopt(*NONE)
usrdfnobj(*NONE) usrdtatfm(*NONE) usrdrvpgm(*NONE) text("IT Laser
Printer")
rmtnetid(*NETATR) wscst(*NONE) aut(LIBCRTAUT). This will create my
device
and outq.
I think this is why I write software and don't normally work with the
hardware end of things.
Any thoughts will be greatly appreciated.
Nick Radich
Sr. Programmer/Analyst
EPC Molding
(320) 679-6683
nradich@xxxxxxxxxxxxxx
_______________________________________________
This is the MAPICS ERP System Discussion (MAPICS-L) mailing list
To post a message email: MAPICS-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/mapics-l
or email: MAPICS-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/mapics-l.
As an Amazon Associate we earn from qualifying purchases.
This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].
Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.
