Saving blanks out member

There is a certain very old member that saves as an empty member when
saving in CODE.  You don't have to make any changes either and several
people can reproduce this.  If we first use an STRCODE session, it saves
the entire member fine but gives errors in CODE and shuts down the STRCODE
session.  Those errors are: EVF2011 RC=2 "There are error messages from the
compilation".  Then when trying to exit the member with F3 gives
"EVF4050E-Communication Daemon  Unable to send data to host server OS400 at
'<ip address>'.  The send failed due to a TCP/IP error - No data was
received."  The ip address stated is not the ip address of our machine.  It
is another server that we never use CODE on.  I decided to try opening up
and saving with the LPEX editor instead and that worked.  I can also fix
the problem by first bringing up the member in SEU and either adding or
deleting a line and saving.  Then when bringing up in CODE and saving, it
is fine.  If you bring up the member in SEU and just change a line and
save, the CODE editor still blows up.  You have to add or delete a line.
Something about SEU fixes the problem when a line is added or deleted.
Doing a source compare shows no differences.  I thought it might have to do
with resequencing in SEU but that was set to "N" every time.  This member
was last modified 4/21/99 with only a couple lines that look fine.  The
original member created 6/20/98 saves fine.  I tested by copying both of
these to a different library.  The original is fine but not the 4/21/99
version.
I am on the latest version of WDSC.  Any ideas?

Thanks!
Craig Strong