× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Have you tried TweakUI from Microsoft's site?

Does the compile window not pop-up at all, or it just doesn't present it
self in front of all other windows?

Aaron Bartell

-----Original Message-----
From: Buck Calabro [mailto:Buck.Calabro@xxxxxxxxxxxx]
Sent: Friday, May 16, 2003 4:11 PM
To: CODE/400 Discussion & Support
Subject: Code V5R1M0 doesn't report events back after Win2k upgrade


I fully realise I am working with old software on an old PC but I am stuck
here for the moment.

Code V5R1M0, sp5 applied.  Was working GREAT on my PII 450 128 meg machine.
Our network folks insisted that we all run Win2k and in lieu of getting my
PC re-formatted and a clean load, I upgraded from Win98 to Win2k.  Had very
few problems doing the upgrade and most everything ran just fine afterwards.

Code wouldn't verify, claiming comms errors.  Which was odd since I have no
trouble signing on and downloading new source.  Compiles worked, too, but
didn't pop up the event window.  I guessed Win2k did something funny so I
went to the ftp site and grabbed SP5 and re-loaded it. Now, verify works
fine, and the only thing that doesn't work as expected is my compile window.
Still doesn't pop up.

No errors in the communications log.
My CURLIB was, and remains the same.
EVFEVENT has a member with my compile errors in it.
I have a matching .EVT file in /WDT400/system.

To my shame, I tried un-installing it, but the un-install process simply sat
consuming 99% of the CPU, doing (apparently) nothing.  I waited over an
hour...

Any advice?
  --buck
_______________________________________________
This is the CODE/400 Discussion & Support (CODE400-L) mailing list
To post a message email: CODE400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/code400-l
or email: CODE400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/code400-l.

NOTE: WDSc for iSeries disucssion has it's own mailing list.
Information can be found at
http://lists.midrange.com/cgi-bin/listinfo/wdsc-l

As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.