× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



This message is in MIME format. Since your mail reader does not understand
this format, some or all of this message may not be legible.
--
[ Picked text/plain from multipart/alternative ]
Actually, Scott, I just read that you have to enter "extras on c:\mymacros"
to get them to work properly. Thanks again!

CHris

-----Original Message-----
From: Scott Mildenberger [mailto:Smildenber@Washcorp.com]
Sent: Tuesday, September 25, 2001 1:57 PM
To: 'code400-l@midrange.com'
Subject: RE: Library lists confusion????????


Chris,

profile.lx is automatically loaded whenever code/400 comes up so any command
that you always want to execute can be put there.

Scott Mildenberger

> -----Original Message-----
> From: Chris Proctor [mailto:cproctor@gartsports.com]
> Sent: Tuesday, September 25, 2001 1:57 PM
> To: 'code400-l@midrange.com'
> Subject: RE: Library lists confusion????????
>
>
> This message is in MIME format. Since your mail reader does
> not understand
> this format, some or all of this message may not be legible.
> --
> [ Picked text/plain from multipart/alternative ]
> Scott,
>
> Isn't there some sort of command that I have to enter in order to have
> code/400 use profile.lx each time it's brought up?
>
> Chris
>
> -----Original Message-----
> From: Scott Mildenberger [mailto:Smildenber@Washcorp.com]
> Sent: Tuesday, September 25, 2001 1:32 PM
> To: 'code400-l@midrange.com'
> Subject: RE: Library lists confusion????????
>
>
> Chris/Mark,
>
> I also us the method Mark does of executing a macro.  I have
> also gone a
> step further and added a menu option to set my library list.
> I do that by
> adding the following lines to my profile.lx file:
>
> 'set actionbar.~Library_Lists.~Starr macro mymacros/starr'
> 'set actionbar.~Library_Lists.~MRL macro mymacros/mrl'
> 'set actionbar.~Library_Lists.~Crew_Calling macro mymacros/crew'
>
> I also noticed that my macro for changing the library list is
> different from
> Mark's but I'm not sure of what the difference is.  Mine is
>
>       say "Starr library list set"
>       codesrv exec OS400S "chglibl libl(starrobj starr
> starrsrc tstdata73)"
>
>
>
> By the way, for anyone interested, their are a couple of Code/400
> tutorial/labs available at
> http://www-4.ibm.com/software/ad/wdt400/course_downloads.html
>  The one at
> the bottom of the page (course code 37LF) is where I learned
> about how to
> create macros along with some other useful things.
>
> Scott Mildenberger
>
>
> > -----Original Message-----
> > From: MWalter@hanoverwire.com [mailto:MWalter@hanoverwire.com]
> > Sent: Tuesday, September 25, 2001 1:06 PM
> > To: code400-l@midrange.com
> > Subject: RE: Library lists confusion????????
> >
> >
> >
> > Chris,
> >
> > This is an example of a simple macro used to change the user
> > library list:
> >
> > /*---------------------------------------------------------------*/
> > /* keystroke record and playback macro. Save to macros directory */
> > /* execute using 'macro macroFilename.'                          */
> > /*---------------------------------------------------------------*/
> > "check"
> > "PRIMITIVE INSERTCHAR 'chglibl libl(qtemp hwoei amamod
> > amfliba pclib mwlib
> > qgpl)'"
> > "lxi CMD RUN"
> >
> > I created this macro with the macro record function.
> > You must save the file in the x:\WDT400\macros directory and
> > must have an
> > extension of .lx. (where x is the drive where WDT400 is installed)
> >
> > Then you get to the Command Shell (F9). Be sure your AS/400
> > server is the
> > active server, press Esc and the cursor goes to the command
> > line at the
> > bottom. Key in "macro fileName" and press Enter. The macro
> > should execute
> > in the command shell.
> >
> > BTW, I don't even use a STRCODE session. The only thing I loose is
> > prompting for CL. I'm on V4R5M1 of CODE. OS/400 Version V4R5M0.
> >
> >
> >
> >
> > Good Luck
> >
> > Mark
> >
> >
> > Mark Walter
> > Sr. Programmer/Analyst
> > Hanover Wire Cloth a div of CCX, Inc.
> > mwalter@hanoverwire.com
> > http://www.hanoverwire.com
> > 717.637.3795 Ext.3040
> >
> >
> >
> >                     Chris Proctor
> >                     <cproctor@gartspor        To:
> > "'code400-l@midrange.com'" <code400-l@midrange.com>
> >                     ts.com>                   cc:
> >                     Sent by:                  Subject:
> > RE: Library lists confusion????????
> >                     code400-l-admin@mi
> >                     drange.com
> >
> >
> >                     09/25/01 02:42 PM
> >                     Please respond to
> >                     code400-l
> >
> >
> >
> >
> >
> >
> > This message is in MIME format. Since your mail reader does
> > not understand
> > this format, some or all of this message may not be legible.
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Hi Mark,
> >
> > How does that work? I've never created a macro to run with
> > code/400. Could
> > you either send me an example or direct me where I might find
> > the info? If
> > I
> > can't do it with a project (which I'd really prefer, IBM
> > (hint, hint)) then
> > I guess I'll have to do something else.  I just don't want
> to have to
> > bounce
> > back and forth between AS/400 session and code/400.  It seems
> > like such a
> > waste of time. I'm trying to get everyone else here to
> start using the
> > tools, but they won't if there's a bunch of bouncing around
> > required to do
> > something as simple as changing a libl!! Is it just me? I'm
> > working on 5
> > different projects at the same time and this is a pain. ha ha. OK, I
> > promise
> > no more complaining (until the next time! ha ha)
> >
> > Thanks!
> >
> > Chris
> >
> > -----Original Message-----
> > From: MWalter@hanoverwire.com [mailto:MWalter@hanoverwire.com]
> > Sent: Tuesday, September 25, 2001 12:39 PM
> > To: code400-l@midrange.com
> > Subject: RE: Library lists confusion????????
> >
> >
> >
> > Chris,
> >
> > I am setting my library lists from the command shell. I have
> > macros that
> > set the libl to which ever environment I need. That method
> > works ok for me.
> >
> >
> > Thanks,
> >
> > Mark
> >
> >
> > Mark Walter
> > Sr. Programmer/Analyst
> > Hanover Wire Cloth a div of CCX, Inc.
> > mwalter@hanoverwire.com
> > http://www.hanoverwire.com
> > 717.637.3795 Ext.3040
> >
> >
> >
> >                     Chris Proctor
> >                     <cproctor@gartspor        To:
> > "'code400-l@midrange.com'" <code400-l@midrange.com>
> >                     ts.com>                   cc:
> >                     Sent by:                  Subject:
> RE: Library
> > lists
> > confusion????????
> >                     code400-l-admin@mi
> >                     drange.com
> >
> >
> >                     09/25/01 02:29 PM
> >                     Please respond to
> >                     code400-l
> >
> >
> >
> >
> >
> >
> > This message is in MIME format. Since your mail reader does
> > not understand
> > this format, some or all of this message may not be legible.
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Thanks for the reply, Darren. That brings up the question
> > then of why do we
> > even have library lists parms in the comm console? If it all
> > had to be done
> > from the AS/400 session then why bother? From the
> discussion last week
> > someone from IBM said that they tried what I was doing and it
> > worked. I was
> > under the impression that STRCODE was not needed. What do you think?
> >
> > Chris
> >
> > -----Original Message-----
> > From: darren@dekko.com [mailto:darren@dekko.com]
> > Sent: Tuesday, September 25, 2001 12:29 PM
> > To: code400-l@midrange.com
> > Subject: Re: Library lists confusion????????
> >
> >
> >
> > Chris,
> >
> > What it sounds like you'd like to do is have the library list
> > assigned for
> > each member, or at least per project.  Didn't you have this
> > same issue when
> > using SEU, library lists were something you had to keep track
> > of there too.
> > I know some change management programs, like Turnover which
> works with
> > CODE, can manage library lists by project, but there is
> > nothing prepackaged
> > in OS/400 or CODE which will do this that I'm aware of.  You
> > might be able
> > to do it with defaults on multiple auto-start servers, but
> > that would be a
> > pain, if possible, too I'd think.
> >
> > For simplicity you might try using a session with STRCODE
> > command running.
> > Your library list will be whatever that sessions libl is.
> And you can
> > EDTLIBL from code on that session easily enough.
> > _____________________________
> > Darren Strong
> >
> >
> >
> >
> >
> >
> >                     Chris Proctor
> >                     <cproctor@gartspor       To:
> > "CODE400-L (E-mail)"
> >                     ts.com>
> <CODE400-L@midrange.com>
> >                     Sent by:                 cc:
> >                     code400-l-admin@mi       Fax to:
> >                     drange.com               Subject:
> > Library lists
> > confusion????????
> >
> >
> >                     09/25/2001 01:02
> >                     PM
> >                     Please respond to
> >                     code400-l
> >
> >
> >
> >
> >
> >
> > This message is in MIME format. Since your mail reader does
> > not understand
> > this format, some or all of this message may not be legible.
> > --
> > [ Picked text/plain from multipart/alternative ]
> > Hi all,
> >
> > I'm still having problems understanding how the library
> lists get set
> > within
> > code/400. There was a discussion a couple of weeks back where
> > someone said
> > I
> > could create a bunch of host names in the hosts file (with
> the same IP
> > address), then go into the communications console, create the
> > servers and
> > define their library lists. I assumed that then I could
> > create CPOs for
> > different projects (each using a different servers with the
> associated
> > libls) and I would have no problem verifying and compiling.
> > WRONG!!!! ha
> > ha. I constantly get file not found errors. And what adds
> > even more to the
> > frustration is that it changes from day to day.
> >
> > Would someone PLEEEEASSE help me understand how the libls
> > work with Code
> > Project and CODE/400? For instance, does the libl defined for
> > the project
> > carry over to code/400 when a source member is selected? Do I
> > have to be
> > signed on to the AS/400? What the #@$*&&#*%& am I doing wrong?!!
> >
> > Can you detect the frustration? ;-)
> >
> > Thanks,
> >
> > Chris Proctor
> > Manager of Systems Integration
> > Gart Sports
> > Denver
> > _______________________________________________
> > This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> > To post a message email: CODE400-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> > or email: CODE400-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/code400-l.
> >
> >
> >
> >
> >
> > _______________________________________________
> > This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> > To post a message email: CODE400-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> > or email: CODE400-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/code400-l.
> > _______________________________________________
> > This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> > To post a message email: CODE400-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> > or email: CODE400-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/code400-l.
> >
> >
> >
> >
> >
> > _______________________________________________
> > This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> > To post a message email: CODE400-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> > or email: CODE400-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/code400-l.
> > _______________________________________________
> > This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> > To post a message email: CODE400-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> > or email: CODE400-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/code400-l.
> >
> >
> >
> >
> >
> > _______________________________________________
> > This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> > To post a message email: CODE400-L@midrange.com
> > To subscribe, unsubscribe, or change list options,
> > visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> > or email: CODE400-L-request@midrange.com
> > Before posting, please take a moment to review the archives
> > at http://archive.midrange.com/code400-l.
> >
> _______________________________________________
> This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> To post a message email: CODE400-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> or email: CODE400-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/code400-l.
> _______________________________________________
> This is the CODE/400 Discussion & Support (CODE400-L) mailing list
> To post a message email: CODE400-L@midrange.com
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
> or email: CODE400-L-request@midrange.com
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/code400-l.
>
_______________________________________________
This is the CODE/400 Discussion & Support (CODE400-L) mailing list
To post a message email: CODE400-L@midrange.com
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/cgi-bin/listinfo/code400-l
or email: CODE400-L-request@midrange.com
Before posting, please take a moment to review the archives
at http://archive.midrange.com/code400-l.


As an Amazon Associate we earn from qualifying purchases.

This thread ...


Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.