×
The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.
You only use the HMC1 port for the HMC or the ASMI, not for Operations LAN
Console.
Pete Massiello
iTech Solutions
http://www.itechsol.com
Add iTech Solutions on Facebook:
http://www.facebook.com/group.php?gid=126431824120
Add iTech Solutions on LinkedIn:
http://www.linkedin.com/groups?gid=2206093
-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of James Rich
Sent: Monday, March 22, 2010 8:23 PM
To: Midrange Systems Technical Discussion
Subject: Re: Installing a 520 for the first time
On Mon, 22 Mar 2010, Kirk Goins wrote:
Have you set your PC to an IP address in the same subnet as the HMC port?
Your PC should have an address of 169.254.2.x with a subneet mask of
255.255.255.0
Yes, and pinging 169.254.2.147 works just fine.
James Rich
if you want to understand why that is, there are many good books on
the design of operating systems. please pass them along to redmond
when you're done reading them :)
- Paul Davis on ardour-dev
As an Amazon Associate we earn from qualifying purchases.