Thanks for the info.
Our /var went from 46% to 18%.
Regards,
Scott Ingvaldson
Senior IBM Support Specialist
Midwest Region Data Center
Fiserv.
-----Original Message-----
From: rob@xxxxxxxxx [mailto:rob@xxxxxxxxx]
Sent: Tuesday, November 17, 2009 2:42 PM
To: Midrange Systems Technical Discussion
Subject: HMC error E212E134
Error E212E134 is disk filling up on the /var file system. To see this
you go to the physical hmc itself (or use kvm access). Remote access
will not work. Under HMC Management pick Restricted Shell Terminal.
Type in monhmc -r disk On the far right column see the /var? Note the
percentage. If it is high then Ctrl-C out of monhmc and enter chhmcfs
-o f -d 0 To verify it worked you can then enter monhmc -r disk and see
if the percentage on /var is reduced. Afterwards Ctrl-C to break out of
monhmc. Then type in exit to exit restricted shell terminal.
Rob Berendt
--
Group Dekko Services, LLC
Dept 01.073
Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
----- Forwarded by Rob Berendt/DEKKO on 11/17/2009 03:36 PM -----
From: ElectronicServiceAgent_hmc01@xxxxxxxxxxxxx
To: rob@xxxxxxxxx
Date: 11/17/2009 01:24 PM
Subject: Problem report from hmc01.DEKKO-1
Reporting system: hmc01
Machine type-model/serial: 7310-CR2/103404A
Problem number: 2
Error: E212E134
Description:
Last occurred: 11/17/09 1:21 PM
Current status: Opened
PMR number: 15400
Details: Remote support call generated on hmc01 completed successfully
by
server hmc01(10.10.1.175).
midrange.com
