Re: Hit capacity of Classic HTTP Server and a module 170

MEMORY... lots of it..
jim
----- Original Message ----- 
From: "Bob Cozzi" <cozzi@xxxxxxxxx>
To: "'Web Enabling the AS400 / iSeries'" <web400@xxxxxxxxxxxx>
Sent: Thursday, January 06, 2005 10:59 AM
Subject: RE: [WEB400] Hit capacity of Classic HTTP Server and a module 170


> It must be the hardware capacity.
> The 170 we're using is:
> CPW Batch: 114 - Inter: 23
> Memory: 128 MB
> So it was probably the 4000 to 5000 hits in that 60 to 90 minute window
that
> brought it to its knees.
> Thanks everyone... I hope to move to a V5Rx machine this year using
Apache.
> -Bob Cozzi
> www.rpgiv.com
>
>
> -----Original Message-----
> From: web400-bounces@xxxxxxxxxxxx [mailto:web400-bounces@xxxxxxxxxxxx] On
> Behalf Of Joel Cochran
> Sent: Thursday, January 06, 2005 2:47 AM
> To: Web Enabling the AS400 / iSeries
> Subject: Re: [WEB400] Hit capacity of Classic HTTP Server and a module 170
>
> On Wed, 2005-01-05 at 23:26, Bob Cozzi wrote:
> > Hi,
> > This morning my little old 170 running IBM's Classic HTTP Server on
OS/400
> > V4.5 "crashed".
>
> > Can the 400 handle 5,000+ to 10,000+ hits per hour on an entry-level
> > machine?
> > -Bob Cozzi
>
> Bob,
>
> When we started http://www.vamanet.com in 2001, we were running a
> similar system.  It only took a couple of months (with relatively little
> traffic) to figure out that this entry level machine couldn't handle
> more than a few simultaneous requests.  The system would quickly just
> come to a halt, and page delivery time became completely unacceptable.
>
> Since then, we have been running a dedicated 270 with 1100 CPW and no
> interactive processor.  I don't have any real numbers for you, but we
> run between 50,000 and 100,000 hits per day, usually with no real
> problems.
>
> Joel
> http://www.rpgnext.com
>
> _______________________________________________
> This is the Web Enabling the AS400 / iSeries (WEB400) mailing list
> To post a message email: WEB400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/web400
> or email: WEB400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/web400.
>
>
>
>
> _______________________________________________
> This is the Web Enabling the AS400 / iSeries (WEB400) mailing list
> To post a message email: WEB400@xxxxxxxxxxxx
> To subscribe, unsubscribe, or change list options,
> visit: http://lists.midrange.com/mailman/listinfo/web400
> or email: WEB400-request@xxxxxxxxxxxx
> Before posting, please take a moment to review the archives
> at http://archive.midrange.com/web400.
>
>