Re: DDS Designer Window subfile

Vern,
I understand that, but usually when a subfile is in a window, the window
record is separate from the control or subfile records.
when using the design record option, the window record is not loaded to the
display. (at least that is what I have seen using 8.5.1).



On Thu, Oct 10, 2013 at 12:19 PM, Vernon Hamberg
<vhamberg@xxxxxxxxxxxxxxx>wrote:

Jeff

Actually, if you select a subfile record in Design Records, its subfile
control record is displayed and not editable. And vice versa.

Ken was originally saying that these do not show when the subfile is in
a window - that also works fine for me in v9.

Vern

On 10/10/2013 11:14 AM, Jeff Young wrote:

Ken,
Are you using the Design Screens function or the Design Records?
If using Design Records, you will not see any records other than the

single

record you are working on.


On Thu, Oct 10, 2013 at 11:38 AM, Ken Killian <kkillian@xxxxxxxxxxxx>

wrote:

Strange!

I happen to be using RDP 8.5, and it DOES NOT work, as I mentioned...

Went back to RDP 8.0.3, and it worked perfectly fine!!!

Have I ever mentioned what a @#$!@#$! Crappy release RDP 8.5 was?!?!?
<Rant Rant>

Sadly, that was the release I show a lot of the newbie, once again, no
wonder they said this is NOT Stable. Worked in Previous Release, but NOT
this Release!

How I wish they would get me RDI 9.0

-Ken Killian-


-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx [mailto:wdsci-l-bounces@xxxxxxxxxxxx

]

On Behalf Of Vernon Hamberg
Sent: Thursday, October 10, 2013 11:23 AM
To: Rational Developer for IBM i / Websphere Development Studio Client

for

System i & iSeries
Subject: Re: [WDSCI-L] DDS Designer Window subfile

Ken

I just took your sample - I'm using 9.0.0.1 - and opened a new DSPF
member. Then I pasted it into the source tab. Went to the design tab,

then

clicked on SUBFILE - the window frame was there, along with the other

bits

from the CONTRL format.

The subfile is in green, the control is in gray.

I do have the "Draw records transparent" button pressed.

Might be a version difference - or be sure in your RDP to have pressed
that button before showing things off.

HTH
Vern

On 10/10/2013 8:42 AM, Ken Killian wrote:

Even when I pick "Design Screens" and add the Subfile/Control formats.
The subfile is NOT shown inside the Window! WTF?!?!? I will have to be
careful NOT to show this in my presentation! <LOL>

Back to Stable SDA, for designing this window subfile. At least it

works

there!

I wish there was a simple way to toggle between opening in DDS Designer

& LPEX. Yes, I know about the File association to say open up with the

DDS

Designer. But, that is global.

Window>Preferences>General>Editors>File Associations> I have DSPF to

default to open with Screen Designer (DEFAULT).

Yeah, I click on the source table often for quick edits. But sometimes,

it is nice to edit with good old LPEX.

-Ken Killian-

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx
[mailto:wdsci-l-bounces@xxxxxxxxxxxx] On Behalf Of Tarr, Kenneth
Sent: Thursday, October 10, 2013 9:17 AM
To: Rational Developer for IBM i / Websphere Development Studio Client
for System i & iSeries
Subject: Re: [WDSCI-L] DDS Designer Window subfile

I have also experienced this behavior...

There are three tabs at the bottom of the design window, "Design",

"Source" and "Preview". Design is the area you actually work on. As

noted

below, you can only see one item at a time, so you can only look at the
Subfile Control or the Subfile record. Source allows you to look at the
source. You can work on edit changes here as well. Preview is where

you

can view the screens together, so here you should be able to view both

the

Subfile Control and Subfile records together. Only difference is that

you

can't make any edit changes. You would have to go back to the Design

tab

to do that.

For me the problem is that you have to go back and forth between the

two

to make sure you're not overlapping any fields. If I remember, CODE
Designer was much more flexible on this. So in my view, I believe there
still is some desired functionality that was in CODE Designer that's

not in

DDS Designer. And if I recall right, CODE Designer was intuitive

enough to

know when you placed something on the screen as to which one it belonged
to. It also did a better job of edit checking on the fly; that is,

knowing

if a name was already in use.

I'm not totally knocking DDS Designer; it does have some features

unique

to itself that makes it easier to work on some scenarios. But I

believe it

sets back development a bit when some of the nice features of CODE

Designer

didn't make their way to this one.

...and unfortunately, no one here has a copy of CODE anymore...yet it's

funny to note RDi still shows it in the "Open with" list...

-----Original Message-----
From: wdsci-l-bounces@xxxxxxxxxxxx
[mailto:wdsci-l-bounces@xxxxxxxxxxxx] On Behalf Of Dave Shaw
Sent: October 10, 2013 08:01 AM
To: Rational Developer for IBM i / Websphere Development Studio Client
for System i & iSeries
Subject: Re: [WDSCI-L] DDS Designer Window subfile

Ken,

I see what you mean - on 9.0.0.1, Design Screens only shows either the

CONTROL or the SUBFILE record, but not both. I checked it in CODE

Designer

(yep, still got the relic loaded), and it works as expected.

Dave Shaw


________________________________
From: Ken Killian <kkillian@xxxxxxxxxxxx>
To: Rational Developer for IBM i / Websphere Development Studio Client
for System i & iSeries <wdsci-l@xxxxxxxxxxxx>
Sent: Thursday, October 10, 2013 8:35 AM
Subject: [WDSCI-L] DDS Designer Window subfile


Hi,

Using SDA for a subfile, window. I see the subfile inside the window!
<cool>

But, using the DDS Designer, the subfile is NOT placed in the window!

Yikes!

Am I missing something?

Here is extremely simple code to verify this:

A DSPSIZ(24 80 *NORMAL)
A R SUBFILE SFL
A OPT 1A O 3 2
A TEXT 20A O 3 5
A R CONTROL SFLCTL(SUBFILE)
A SFLDSP
A SFLSIZ( 24)
A SFLPAG(0005)
A WINDOW(2 2 15 30)
A 2 1'opt'
A 2 6'text'

Pardon this dumb down example. But it displays properly inside SDA.

Inside the DDS Designer the subfile is NOT shown in a window! What is

the

point of having a Visual Designer, when SDA works. But Ration Developer
cannot display window!

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list To post a message
email: WDSCI-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list
options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives at
http://archive.midrange.com/wdsci-l.
--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.

--
This is the Rational Developer for IBM i / Websphere Development Studio
Client for System i & iSeries (WDSCI-L) mailing list
To post a message email: WDSCI-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/wdsci-l
or email: WDSCI-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/wdsci-l.