× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



It was already stated, but I will state it again in these terms.
Just becuase *INLR is does not mean the program has ended.
If there is a 'Goto' or a loop then code you are showing may be getting executed
twice after *INLR is on.
Without seeing the full set of code it is hard to tell.



On June 28, 2016 at 9:56 AM "Hayes, Daniel" <Daniel.Hayes@xxxxxxxxxxxxxxx>
wrote:


Mark,

Thanks for the reply.

There is no initialization in the RPG, no parms passed, and I listed the
entire CL Program.

The cl program ends and then about a tenth of a second later it starts over,
at the first executable statement.

Even if the RPG program was doing some initialization, how can the CL start
again, on its own?

The CL was called when LR was on in the RPG, so when it returns the RPG should
end, that is the last code in the MAIN section, subroutines start on the next
line.

Danny Hayes | Sr JDE Developer - IT | 813 901-2150 x133154

-----Original Message-----
From: RPG400-L [mailto:rpg400-l-bounces@xxxxxxxxxxxx] On Behalf Of Mark
Murphy/STAR BASE Consulting Inc.
Sent: Tuesday, June 28, 2016 9:06 AM
To: RPG programming on the IBM i (AS/400 and iSeries)
Subject: Re: I have an anomaly, please explain to me. **External Email**

Well, apparently it can happen. You haven't given us enough of the program to
see the issue. Since it is an intermittent problem, I would suspect an
initialization error in the RPG. Debug the loop surrounding the call to
J04572CCX and you should find it.

Mark Murphy
STAR BASE Consulting, Inc.
mmurphy@xxxxxxxxxxxxxxx


-----"Hayes, Daniel" <Daniel.Hayes@xxxxxxxxxxxxxxx> wrote: -----
To: "rpg400-l@xxxxxxxxxxxx" <rpg400-l@xxxxxxxxxxxx>
From: "Hayes, Daniel" <Daniel.Hayes@xxxxxxxxxxxxxxx>
Date: 06/28/2016 08:41AM
Subject: I have an anomaly, please explain to me.


I have an issue happening that cannot happen.

The CL program listed below, on occasion, not frequently, does what the
partial joblog below is showing.

It is called from an RPG program when LR is on.

In this particular instance the CL program Ends then 0.147576 Seconds later it
begins on line 34.02 again.

This CL is ONLY called from this RPG program, nowhere else on the system.


P04572 - RPG (Relevant segments)
MOD05I 'J04572CCX ' C @@CCX
...
MOD05C* Write Check Information record for Carecentrix
MOD05C *INLR IFEQ *ON
MOD05C CAREC IFEQ 'YES'
MOD05C CALL @@CCX
MOD05C ENDIF
MOD05C ENDIF

J04572CCX - CLP (Entire Program)
PGM

/* Backup check files */
CPYF FROMFILE(*LIBL/F04572) +
TOFILE(*LIBL/F04572BK) MBROPT(*REPLACE) +
CRTFILE(*YES)
CPYF FROMFILE(*LIBL/F04573) +
TOFILE(*LIBL/F04573BK) MBROPT(*REPLACE) +
CRTFILE(*YES)

/* Write records to F55061 from F04573 */
CALL PGM(P04572CCX)

/* Create an extract file for CareCentrix */
CALL PGM(J55061) PARM('N')

ENDCLPGM: ENDPGM

JOBLOG from run in question;
06/27/16 08:19:47.497464 QCLRTNE QSYS 0058 J55061 CCXJDEOBJ *STMT
Statement . . . . . . . . . : 17400
Message . . . . : - RETURN /* RETURN due to end of CL program
*/
06/27/16 08:19:47.497568 QCLRTNE QSYS 0058 J04572CCX CCXJDEOBJ 0025
Message . . . . : - RETURN /* RETURN due to end of CL program
*/
06/27/16 08:19:47.645144 QCADRV QSYS 03C4 J04572CCX CCXJDEOBJ 000D
Message . . . . : 3402 - CPYF FROMFILE(*LIBL/F04572)


Daniel E. 'Danny' Hayes
Senior JD Edwards Developer
813 901-2150 x133154
[cid:image001.png@01D1D110.0FEFF100]
9119 Corporate Lake Drive | Tampa Florida 33634 |
www.carecentrix.com<http://www.carecentrix.com/>


________________________________
This communication is intended only for the use of the individual or entity
named as the addressee. It may contain information which is privileged and/or
confidential under applicable law. If you are not the intended recipient or
such recipient's employee or agent, you are hereby notified that any
dissemination, copy or disclosure of this communication is strictly
prohibited. If you have received this communication in error, please
immediately notify CareCentrix Compliance Hot Line at (877) 848-8229 and
notify the sender by electronic mail. Please expunge this communication
without making any copies. Thank you for your cooperation.
--
This is the RPG programming on the IBM i (AS/400 and iSeries) (RPG400-L)
mailing list
To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/rpg400-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.
--
This is the RPG programming on the IBM i (AS/400 and iSeries) (RPG400-L)
mailing list
To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/rpg400-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.


------------------------------------------------------------------------------

This message was received from an address external to CareCentrix. If PHI or
otherwise sensitive data is being requested via a reply, please verify via a
means other than email that the request is valid. If you have concerns or
questions, please escalate to your supervisor as soon as possible. Your local
Business-Technology team is also available to help. If you suspect a
compliance or ethical issue, please report it promptly to the Compliance
Hotline at 877-848-8229 or via e mail at compliance@xxxxxxxxxxxxxxx

--
This is the RPG programming on the IBM i (AS/400 and iSeries) (RPG400-L)
mailing list
To post a message email: RPG400-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/rpg400-l
or email: RPG400-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/rpg400-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.
Paul Therrien
Andeco Software, LLC
paultherrien@xxxxxxxxxxxxxxxxxx

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.