× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: WYATTERP
  • From: Jim Langston <jimlangston@xxxxxxxxxxxxxxxx>
  • Date: Tue, 17 Apr 2001 13:14:44 -0700
  • Organization: Pacer International

http://www.mochasoft.dk/
is the one I use.  Very low cost ($25 or $250 for corporate license) and
is shareware, 30 day evaluation (guiltware).

Regards,

Jim Langston

D.BALE@handleman.com wrote:
> 
> Brad wrote:
> >Because that IP address serves many different sites, it doesn't accept
> >IP address requests from browsers.
> 
> >Why the telnet doesn't work, I'm not sure.  Are you behind a firewall?
> Most likely.
> 
> Is there a telnet client I can use from my home PC that will let me sign on to
> the WYATTERP site?  (preferably free or very low cost as I'm not sure I'd use
> it more than a few times)
> 
> Jim wrote:
> >Can you ping 63.167.147.10 Dan?
> No. I get TCP3213: Cannot reach remote system
> Cause: There is no active route to the system 63.167.147.10 at address
> 63.167.147.10.
> Recovery: Start the route to the remote system using the Start TCP Interface
> (STRTCPIFC) command.
> 
> So, I call up STRTCPIFC and start a wild goose chase down to host table
> entries and whatnot.  Much too complicated without the proper reference
> material.
> 
> >P.S.  How many times to people call you Dale?  I had to edit this
> >message and fix it :)
> YOU NOTICED!  Thank you, Jim!  I gave up counting years ago.  Even when
> reading my full name, Dan Bale, (and not an email abbreviation, e.g. D.Bale),
> I still get called Dale.  Even after I verbally tell people my name, I still
> get called Dale.  Maybe if I changed my name to Dale Ban?  <sigh>  There's one
> person on this list with whom I've been corresponding privately over the past
> week or so who keeps starting his emails with 'Dale,' even though I use the
> same sig.  (Maybe he'll see himself here?)  Maybe I should use a new sig?
> Check it out <G>:
> 
> Dan (NOT DALE) Bale
> IT - AS/400
> Handleman Company
> 248-362-4400  Ext. 4952
> D.Bale@Handleman.com
>   Quiquid latine dictum sit altum viditur.
>   (Whatever is said in Latin seems profound.)
> 
> -------------------------- Original Message --------------------------
> > -----Original Message-----
> > From: D.BALE@handleman.com [mailto:D.BALE@handleman.com]
> > Sent: Tuesday, April 17, 2001 10:33 AM
> > To: RPG400-L@midrange.com
> > Subject: WYATTERP (was Re: Overlay with)
> >
> >
> > I tried doing this before, and tried again today:
> >
> > On AS/400: TELNET RMTSYS(*INTNETADR) INTNETADR('63.167.147.10')
> > Get TCP3409: Not able to establish connection with remote host system.
> > Not sure if this is a security issue or setup issue.
> >
> > From my Netscape 4.7 browser:  Error 403: Forbidden - by rule
> > I'm guessing some in-house filter is prohibiting this.
> >
> > So, I went to http://www.anonymizer.com and tried a
> http://63.167.147.10
> there, but got the same Error 403 as above.  So maybe 403 comes from
> WYATTERP,
> and not from my side?
> 
> What am I doing wrong?
> 
> Dan Bale
> IT - AS/400
> Handleman Company
> 248-362-4400  Ext. 4952
> D.Bale@Handleman.com
>   Quiquid latine dictum sit altum viditur.
>   (Whatever is said in Latin seems profound.)
> 
> -------------------------- Original Message --------------------------
> Jim,
> 
> Telnet over to 63.167.147.10 and signon as WYATTERP.
> 
> Run the GLNOWRK (Work with G/L accounts) and see if this behavior is what
> you
>  are looking
> for.
> 
> If it is, choose the WYATTERP demo from the menu which will give you a
> command
>  line.
> >From there WRKMBRPDM  WYATTERPP/QPGMSRC and look for members GLNODSPF and
>  GLNOWRK.
> 
> hth
> 
> Jim Langston wrote:
> 
> > Dang, you're good!
> >
> > Thanks, I couldn't use the SLNO with my header display line set to 13, but
> I
> > added the CLRL(6) (clearing lines 13 through 18) and it now does exactly
>  what
> > I want it to do.  It overlays the portion of the screen with the subfile
> > (although it is blank right now since no records loaded) and still allows
> me
> > to edit S1.
+---
| This is the RPG/400 Mailing List!
| To submit a new message, send your mail to RPG400-L@midrange.com.
| To subscribe to this list send email to RPG400-L-SUB@midrange.com.
| To unsubscribe from this list send email to RPG400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---

As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.