× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.


  • Subject: Re: Recreation of service program using binder language
  • From: "David Morris" <dmorris@xxxxxxxxxxxxx>
  • Date: Wed, 25 Aug 1999 13:11:30 -0600

Frank,

You didn't mention whether you are using updsrvpgm or crtsrvpgm, 
but if you are using crtsrvpgm, you need to specify all of the modules 
or binding directories that define exports in the service program.  The 
missing export should be listed in your low level messages.  Make sure 
that you have specified the module that contains this export.

One other thing you may or may not be aware of is that the new export 
should be added at the end of the *CURRENT block.  If you add it in 
the middle, you will find your programs calling the wrong procedures.

David Morris

>>> Frank Jodat <jodat@Dakosy.DE> 08/25/99 08:07AM >>>
Hello,

I'm having problems with the recreation of a service program already in
use.
I wrote a new procedure that I want to add to the existing service
program.
The module with now 5 procedures compiled without any problems. But when
I
try to recreate the service program using the binder language I get
error
message CPD5CE5 which means "symbol not defined". I looked into the
module
and the new procedure is there. Prototype and procedure with keyword
EXPORT
is fine. In QSRVSRC I have defined two lists of exports, one for the
current
program level with the new procedure as last entry in the list, one for
the
previous program level without the new procedure. On both lists level
check
is *YES and I'm using specified signatures.
What I'm doing wrong ? The recreation fails due to the error message
above.
BTW we're on V4R1. Any help will be appreciated.

Regards,
Frank Jodat

+---
| This is the RPG/400 Mailing List!
| To submit a new message, send your mail to RPG400-L@midrange.com.
| To subscribe to this list send email to RPG400-L-SUB@midrange.com.
| To unsubscribe from this list send email to RPG400-L-UNSUB@midrange.com.
| Questions should be directed to the list owner/operator: david@midrange.com
+---


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.