× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



I went the opposite route and did Ethernet over Power a.k.a. Powerline
Ethernet. Plug 'n' go. No cables to run. Drop a switch anywhere if
needed. 200Mb aggregate speed for the home; 100Mb from each access point.
One-touch setup for encryption.

I used these (
http://www.netgear.com/Products/PowerlineNetworking/PowerlineEthernetAdapters/HDXB111.aspx)
to route Ethernet from my basement to our master bedroom. In the
master
bedroom I dropped a 5 port switch that's supporting a PC, DVR, Bluray
player, and Slingbox. That's a lot of LEDs at night so a little electrical
tape was used to black out some of them. :)

The Slingbox was free from Dishnetwork as I'm in their trial program to see
how well it works with their DVRs and such. The installation tech even
brought Sling's Powerline equipment ( http://www.slingbox.com/go/slt ) to
make sure Ethernet was available, although we wound up using my existing
gear.

On Tue, Nov 17, 2009 at 1:20 PM, David Gibbs <david@xxxxxxxxxxxx> wrote:

Folks:

I'm really unfamiliar with power over ethernet ... can anyone tell me if
it's possible to power a switch (4-8 ports) using POE?

I'm contemplating running cat5 up to the attic of my house so I can put
ethernet connections in the various bedrooms and the family room (currently
over slab).

I'm thinking I will put a long run of cat 5 up to the attic, and connect
that to a 4 port switch, and then run more wire to the various bedrooms and
the family room.

Problem is, I want to put a switch in the closet of a bedroom ... but
there's no power in the closet to plug a switch into.

If POE can provide enough juice to run the switch, that might solve the
problem.

Thanks!

david

--
IBM i on Power Systems - For when you can't afford to be out of business
--
This is the PC Technical Discussion for iSeries Users (PcTech) mailing list
To post a message email: PcTech@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/pctech
or email: PcTech-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/pctech.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.