RE: Loading Image Catalog

OK you have a network but the target box needs to have the Service Tools
device handle that side.

So delete 10.10.206.129 interface and line description. Go into SST and set
up the Service Tools interface to use that resource name (it will not be
available until the Ethernet line description is deleted) and set up the
target there. After saving and restarting the interface if the host can
ping the remote you're off to the races.

--
Jim Oberholtzer
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Rob
Berendt
Sent: Wednesday, August 31, 2016 12:03 PM
To: Midrange Systems Technical Discussion
Subject: Re: Loading Image Catalog

Bingo!

Host:
ENDTCPIFC INTNETADR('10.10.206.181')
RMVTCPIFC INTNETADR('10.10.206.181')
ADDTCPIFC INTNETADR('10.10.206.181') LIND(VRTETH)
SUBNETMASK('255.255.255.0') MTU(1496) STRTCPIFC
INTNETADR('10.10.206.181') NETSTAT *IFC shows it active


Guest:
ENDTCPIFC INTNETADR('10.10.206.129')
RMVTCPIFC INTNETADR('10.10.206.129')
ADDTCPIFC INTNETADR('10.10.206.129') LIND(VRTETH)
SUBNETMASK('255.255.255.0') MTU(1496)
STRTCPIFC INTNETADR('10.10.206.129')
NETSTAT *IFC shows it active

Host:
PING RMTSYS(GDISYS2VLAN) LCLINTNETA('10.10.206.181')
Verifying connection to host system GDISYS2VLAN at address 10.10.206.129.
PING reply 1 from 10.10.206.129 took 0 ms. 256 bytes. TTL 64.
PING reply 2 from 10.10.206.129 took 0 ms. 256 bytes. TTL 64.
PING reply 3 from 10.10.206.129 took 0 ms. 256 bytes. TTL 64.
PING reply 4 from 10.10.206.129 took 0 ms. 256 bytes. TTL 64.
PING reply 5 from 10.10.206.129 took 0 ms. 256 bytes. TTL 64.
Round-trip (in milliseconds) min/avg/max = 0/0/0.
Connection verification statistics: 5 of 5 successful (100 %).

Guest:
PING RMTSYS(RACK2HSTVLAN) LCLINTNETA('10.10.206.129')
Verifying connection to host system RACK2HSTVLAN at address
10.10.206.181.
PING reply 1 from 10.10.206.181 took 0 ms. 256 bytes. TTL 64.
PING reply 2 from 10.10.206.181 took 0 ms. 256 bytes. TTL 64.
PING reply 3 from 10.10.206.181 took 0 ms. 256 bytes. TTL 64.
PING reply 4 from 10.10.206.181 took 0 ms. 256 bytes. TTL 64.
PING reply 5 from 10.10.206.181 took 0 ms. 256 bytes. TTL 64.
Round-trip (in milliseconds) min/avg/max = 0/0/0.
Connection verification statistics: 5 of 5 successful (100 %).


Rob Berendt