Re: Operations Console error 406 after updating to V7R3

Two things:

When the Memo to Users says this:
<snip>
The service tool server which includes LAN console is removing support for
SSL V3 ciphers which means
the LAN console feature in the 7.1 IBM i Access for Windows client is no
longer supported in 7.3. IBM i
Access Client Solutions is now required for LAN console in 7.3. IBM i
Access Client Solutions, which is
shipped with the system, should be installed on your PC before installing
the License Internal Code (LIC)
on the IBM i. The LAN console feature in IBM i Access Client Solutions can
connect to any supported
IBM i release.
</snip>
It REALLY REALLY means it!!!

And the next paragraph sounds almost exactly as to what Brad was seeing:
<snip>
Note: The LAN console feature in the IBM i Access for Windows client will
work for a D-mode install
because SSL ciphers aren't used during the D-mode IPL but on the following
A-mode IPL the IBM i
Access for Windows LAN console will fail to connect. The IBM i Access for
Windows client does not
need to be removed from the PC but be aware the IBM i Access for Windows
console will not continue
working if the system is upgraded to 7.3.
</snip>

Folks,
When the MTU says something, and/or the installation instructions say
something, assume they REALLY mean it.

Rob Berendt