RE: Operations Console error 406 after updating to V7R3

I bet it connects during the start of the IPL, but not after IBM I (when it goes from LIC IPL to Operating System IPL) you lose the console. See previous email,

Pete

Pete Massiello
iTech Solutions
http://www.itechsol.com
http://www.iInTheCloud.com

Office: 203-744-7854




-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Bradley Stone
Sent: Sunday, April 24, 2016 9:38 PM
To: Midrange Systems Technical Discussion
Subject: Re: Operations Console error 406 after updating to V7R3

Maybe some more information that will help:

Allow console recovery and console can be taken

over by another console . . . . . . . . . 2 1=Yes, 2=No



Select one of the following:

Console type . . . . . . . . . . . . . . . . 3

1. Twinaxial

2. Operations console(Direct)

3. Operations console(LAN)

4. Hardware management console(HMC)

Current state of console tag . . . . . . . . 0 <------- THIS LOOKS
FISHY




Allow supported internal LAN adapter to

be the console . . . . . . . . . . . . . . . 2 1=Yes, 2=No

Allow supported external LAN adapters to

be the console . . . . . . . . . . . . . . . 1 1=Yes, 2=No




Why would the current state of the console tag be 0?

On Sun, Apr 24, 2016 at 8:10 PM, Bradley Stone <bvstone@xxxxxxxxx> wrote:

Just followed everything to update to V7R3 on my new power 8 and it
just won't log into the console anymore.

It did just fine installing PTFs, IPLing, etc to get ready.

Now it tries to connect. The status stays as "pending authorization".
I try to log on and get:

Communication error validating the connection to xxx.xxx.xxx.xxx Error
code: 406

The panel shows A6005008. And it's also for some reason IPLing to the
A side after the IPL to load from a virtual device.

I can manually IPL to the B side and get things working, but
everything there reports V7R2 still. While Operations console shows
V7R3 and I still can't log into the console with any IDs.

I've searched all over and can't find anything that tells me why I'm
getting the 406 error.

I've tried removing the system for ops console. Having it discover
it, no dice. Still the same things.
Any ideas? thanks!

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related questions.