Re: Operations Console error 406 after updating to V7R3

Maybe some more information that will help:

Allow console recovery and console can be taken

over by another console . . . . . . . . . 2 1=Yes, 2=No



Select one of the following:

Console type . . . . . . . . . . . . . . . . 3

1. Twinaxial

2. Operations console(Direct)

3. Operations console(LAN)

4. Hardware management console(HMC)

Current state of console tag . . . . . . . . 0 <------- THIS LOOKS
FISHY




Allow supported internal LAN adapter to

be the console . . . . . . . . . . . . . . . 2 1=Yes, 2=No

Allow supported external LAN adapters to

be the console . . . . . . . . . . . . . . . 1 1=Yes, 2=No




Why would the current state of the console tag be 0?

On Sun, Apr 24, 2016 at 8:10 PM, Bradley Stone <bvstone@xxxxxxxxx> wrote:

Just followed everything to update to V7R3 on my new power 8 and it just
won't log into the console anymore.

It did just fine installing PTFs, IPLing, etc to get ready.

Now it tries to connect. The status stays as "pending authorization". I
try to log on and get:

Communication error validating the connection to xxx.xxx.xxx.xxx
Error code: 406

The panel shows A6005008. And it's also for some reason IPLing to the A
side after the IPL to load from a virtual device.

I can manually IPL to the B side and get things working, but everything
there reports V7R2 still. While Operations console shows V7R3 and I still
can't log into the console with any IDs.

I've searched all over and can't find anything that tells me why I'm
getting the 406 error.

I've tried removing the system for ops console. Having it discover it, no
dice. Still the same things.
Any ideas? thanks!