Are you sure all the directory entries are correct? Also depending on how
the system was recovered, you might have an issue with the logical files in
QGPL/QUSRSYS. I'd go out and look to see if you have any of the
'ABCDEV0001' type file names on logicals indicating there was an issue with
the restore. I've seen that problem even with very experienced admins.
Long shot but it might provide some insight.
--
Jim Oberholtzer
Agile Technology Architects
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
RIAAN.RAS@xxxxxxxxx
Sent: Wednesday, April 20, 2016 8:01 AM
To: Midrange Systems Technical Discussion
Cc: MIDRANGE-L
Subject: Re: Incomming SMTP emails not being processed.
Hi ROb.
I have tested the mail by performing the Telnet but to the SMTP port 25.
Outgoing mail is working perfectly.
Sending mail to an user id on the IBMi system is where the problem is.
Both from external and from the internal telnet session.
Will wait for IBM to respond.
Thank you
From: Rob Berendt <rob@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 2016-04-20 02:45 PM
Subject: Re: Incomming SMTP emails not being processed.
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Good idea to contact IBM.
You might also want to try the email troubleshooting steps at the knowledge
center.
If it's accessible from the internet you may want to try
http://www.zmailer.org/mxverify-cgi.html
You could try these steps from a Windows DOS command prompt telnet myibmi 21
This tells you to telnet into your IBM i on port 21 (email) Enter in this
command RSET It should echo back
250 flushed
Then enter this command
MAIL FROM:<postmaster@xxxxxxxxxxxxx>
It should echo back
250 OK
Then enter this command
RCPT TO:<postmaster@xxxxxxxxx>
It should echo back
250 OK
Now you know you're connecting pretty good.
At this point I normally enter
QUIT
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: RIAAN.RAS@xxxxxxxxx
To: midrange-l@xxxxxxxxxxxx
Date: 04/20/2016 08:36 AM
Subject: Incomming SMTP emails not being processed.
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
Hi All.
We have failed over from Production to the DR server as part of our annual
testing and are experiencing mail problems on the DR server.
The DR server is a identical copy of the Production server as we used the
same backup to restore both systems when moving over to the
new Power 8 hardware.
All outgoing email is working properly but no incoming email is processed.
SMTP configuration is identical on both servers as well as all
the directory entries. When external email is send to the IBMi sever do
you get a non-delivery notification and noting is written to the mail
box on the IBMi server. (/QTCPTTM/MAIL/'user id')
I have send SMTP trace logs to IBM on a open PMR but we have no solution
as yet.
Have anybody had such a problem?
Kind regards
Riaan
The information contained in this communication is confidential and may be
legally privileged. It is intended solely for the use of the individual or
entity to whom it is addressed and others authorised to receive it. If you
are not the intended recipient you are hereby notified that any
disclosure, copying, distribution or taking action in reliance of the
contents of this information is strictly prohibited and may be unlawful.
Neither Technology Corporate Management (Pty) Ltd nor any of its
subsidiaries are liable for the proper, complete transmission of the
information contained in this communication, or for any delay in its
receipt, or for the assurance that it is virus-free. If you have received
this in error please report it to info@xxxxxxxxx
midrange.com
