× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi WIlliam

Is there a green light on the front of the box ? If so it it flashing or on
light up solid ?

On Thu, Jan 21, 2016 at 6:14 AM, Hopkins, William <
William.Hopkins@xxxxxxxxxxxxxxxxx> wrote:

Thanks for confirming that Chris.

So back to the question...

When the function 2 is set to manual mode= 'M', why does the control panel
not show function 3?



-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Chris Bipes
Sent: Wednesday, January 20, 2016 12:10 PM
To: 'Midrange Systems Technical Discussion' <midrange-l@xxxxxxxxxxxx>
Subject: RE: No system console and TCP/IP down

No a 710 does not have a key. You can stop looking for the key.


Chris Bipes
Director of Information Services
CrossCheck, Inc.


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Hopkins, William
Sent: Wednesday, January 20, 2016 8:59 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: RE: No system console and TCP/IP down

Thanks Chris

I just read this in the document provided yesterday.

1. If your system uses a keystick, insert it in the key slot.
So I used those terms.
2. Place the system into manual mode by using the system's control
panel.

I do not think there is one on the IBMi Power 710 Express.

But when I changed function 2 to be manual = "M" and the function 3 did
not become available.

I started thinking there might be one I am not seeing and it was not
allowing the change to go through without one.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

Please contact support@xxxxxxxxxxxx for any subscription related
questions.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.