There is some restriction when using CRTUSRPRF and CHGUSRPRF with adopted
authority
some documentation here
http://www-01.ibm.com/support/docview.wss?uid=nas8N1013328
Kind Regards,
Paul
From: "Smith, Mike" <Mike_Smith@xxxxxxxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 21/08/2015 15:51
Subject: RE: [Bulk] possible pgm adoption issue
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
2 programs involved. 1 Cl and 1 SQLRPGLE.
Both have USRPRF(*OWNER) and owner is QSECOFR
Cl calls the SQLRPGLE.
I know you have to be careful on a SQLRPGLE and change the owner on the
compile.
The SQLRPGLE executes a command via QCMDEXC to CRTUSRPRF. The majority of
the parms are retrieved via a RTVUSRPRF command.
The CRTUSRPRF fails with not authorized to a Group Profile.
In trying to resolve, I created a new user from an existing user that has
a different Group Profile. This was successful.
Which would seem to indicate a difference in the Group Profiles. However
both are owned by QSECOFR with *public *exclude and a Group of QSECOFR.
They appear to be identical in their authority.
Mike
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Friday, August 21, 2015 9:29 AM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: RE: [Bulk] possible pgm adoption issue
USRPRF(*OWNER) and USEADPT(*YES) are two unrelated things. Well maybe not
unrelated but it makes no sense for a program to have both.
USRPRF(*OWNER) says to not use the authority of the user currently running
the program but to adopt the authority of the person who owns this program
instead.
USEADPT(*YES) says if there is an unbroken chain of USEADPT(*YES)
throughout the call stack all the way up to some program which does
USRPRF(*OWNER) then to use that adopted authority. For example, let's say
you have an intitial program called BPCSMENU and it is owned by SSA and it
has USRPRF(*OWNER). BPCSMENU calls PGMA owned by SMITTY which has
USRPRF(*USER) USEADPT(*YES) then it will continue to use the adopted
authority of SSA. If PGMA calls PGMB then this chain continues until the
first program that has USEADPT(*NO).
But, yes, I would check for the presence of one or the other of these.
There are some scenarios in which adopting authority does no good. Mainly
accessing data in the stream file system outside of the /qsys.lib system.
This will require using the profile handle APIs.
Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com
From: Paul Roy <paul.roy@xxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 08/21/2015 08:50 AM
Subject: RE: [Bulk] possible pgm adoption issue
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
does the DSPPGM shows USRPRF (*OWNER) or USEADPT(*YES) ?
Cordialement, Kind Regards,
Merci, thank you,
Paul
From: "Smith, Mike" <Mike_Smith@xxxxxxxxxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Date: 20/08/2015 18:03
Subject: RE: [Bulk] possible pgm adoption issue
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>
The program is owned by QSECOFR.
-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
Mark S Waterbury
Sent: Thursday, August 20, 2015 12:01 PM
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Subject: Re: [Bulk] possible pgm adoption issue
Mike:
What profile owns this program, and thus, is the profile that it adopts
authority from? What authority does that user profile have?
Mark S. Waterbury
On 8/20/2015 11:41 AM, Smith, Mike wrote:
We have a program that an operator uses when setting up a new user. It
basically does a RTVUSRPRF on an existing user and then issues a CRTUSRPRF
on the new user with values from the existing user. This has been used
for years, but I'm running into an issue this morning.
The program uses adopted authority.
Program is receiving an error on the CRTUSRPRF stating not authorized
to a Group Profile. The Group Profile is a supplemental group.
While trying to diagnose the problem, I had the operator run this
program on a different user that uses a different Group Profile. This
time the program worked.
I have checked the authority on both of the group profiles. Both are
owned by QSECOFR with *public Exclude and with *GROUP QSECOFR.
I cannot find any difference in these 2 Group Profiles other than the
list of users with authority. In both cases the Profile being copied
also has authority to the Group Profile.
The operator running the program does not have specific authority to
either of these Group Profiles.
The CRTUSRPRF is being executed via a QCMDEXC in an RPGLE program.
It appears Adoption is working up to the point of the CRTUSRPRF
specifically for this 1 Group Profile.
I feeling like I'm missing something simple, but I'm not sure what.
Any ideas?
Mike
NOTICE: This message, including any attachment, is intended as a
confidential and privileged communication. If you have received this
message in error, or are not the named recipient(s), please immediately
notify the sender and delete this message.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/midrange-l.
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit:
http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at
http://archive.midrange.com/midrange-l.
NOTICE: This message, including any attachment, is intended as a
confidential and privileged communication. If you have received this
message in error, or are not the named recipient(s), please immediately
notify the sender and delete this message.
midrange.com
