RE: Power7 Firmware update question - HMC code level

Downloading the files to an FTP site inside your network works extremely
well.

When I'm doing just the HMC I usually just put the code on the IBM i and get
it from there.

--
Jim Oberholtzer
Chief Technical Architect
Agile Technology Architects


-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 2:30 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level

I've used about all those options.
With my new HMC's I started out with new DVDs. Major upgrades I use flash
drives. For service packs and whatnot I've done via ftp directly from the
HMC.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: "Steinmetz, Paul" <PSteinmetz@xxxxxxxxxx>
To: "'Midrange Systems Technical Discussion'"
<midrange-l@xxxxxxxxxxxx>
Date: 04/15/2015 03:09 PM
Subject: RE: Power7 Firmware update question - HMC code level
Sent by: "MIDRANGE-L" <midrange-l-bounces@xxxxxxxxxxxx>



Rob,

Thanks for links.
I'm planning on going to 8.8.2.0 SP1.
However, this will need to be a two step.
7.7.7.0 to 7.7.7.9 SP 1
7.7.7.9 SP1 to 8.8.2.0 SP1.

1) Which upgrade option do you use?
Iso images ; Ordering/using DVDs/CD ; Download Direct from IBM to HMC

2) Have you ever used flash drive for code updates?

Paul

-----Original Message-----
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of
rob@xxxxxxxxx
Sent: Wednesday, April 15, 2015 2:18 PM
To: Midrange Systems Technical Discussion
Subject: RE: Power7 Firmware update question - HMC code level

The level of HMC code has reached "End of Service Pack Support" as shown
by
http://www-304.ibm.com/support/customercare/flrt/matrix?domain=mtm=8205-E6C&;
pkey=pwr


From:
http://delivery04.dhe.ibm.com/sar/CMA/HMA/04x1x/2/MH01453.readme.html
HMC V8 R8.2.0 supports the following HMC models:
Deskside: C08
Rack Mount: CR5, CR6, CR7, and CR8
HMC V8 R8.2.0 does not support models CR2, CR3, CR4 and C03, C04, C05,
C06, C07.



Rob Berendt