I was doing a dedicated system save following an IPL for PTF apply.
The save appeared to be hung, did not see any activity to the tape library for over an hour.
From the HMC , I forced down the LPAR.
The following IPL resulted in the 1 CPF0C4D and 19 CPF7001.
Each of the CPF7001 occurred while the system was creating and detaching system journal receivers.
I performed another system save, which was successful, followed by 2 more IPLs, which were error free.
Do I need to be concerned with the damaged objects, or did the additional IPLs resolve the issue?
Message ID . . . . . . : CPF0C4D Severity . . . . . . . : 30
Message type . . . . . : Escape
Date sent . . . . . . : 10/25/14 Time sent . . . . . . : 22:08:02
Message . . . . : Error occurred while processing object QSZPAVLI in library
QUSRSYS.
Cause . . . . . : While processing object QSZPAVLI type *PRDAVLI in library
QUSRSYS an error occurred which prevented the operation from completing
successfully. The return code is 0099-DAMAGED.
Recovery . . . : See the previously listed messages. Correct any errors,
and try the request again.
Message ID . . . . . . : CPF7001 Severity . . . . . . . : 30
Message type . . . . . : Diagnostic
Date sent . . . . . . : 10/25/14 Time sent . . . . . . : 22:08:13
Message . . . . : Damage was detected but has been ignored.
Cause . . . . . : Damage was detected during the requested operation.
However, the operation was completed.
Recovery . . . : Look at the job log (DSPJOBLOG command) for the messages
that identify the cause of the damage.
Thank You
_____
Paul Steinmetz
IBM i Systems Administrator
Pencor Services, Inc.
462 Delaware Ave
Palmerton Pa 18071
610-826-9117 work
610-826-9188 fax
610-349-0913 cell
610-377-6012 home
psteinmetz@xxxxxxxxxx
http://www.pencor.com/
midrange.com
