Are these jobs running in PASE?
On 8/14/2014 7:44 PM, Steinmetz, Paul wrote:
This is still not making sense.
But only 2 CPI2417
Message ID . . . . . . : CPI2417 Severity . . . . . . . : 40
Message type . . . . . : Information
Date sent . . . . . . : 08/12/14 Time sent . . . . . . : 12:00:23
Message . . . . : Job message queue for 978872/TRP1/S001NITE19 has been
If the job message queue only wrapped 2 times, there should only be 3 joblogs.
Also, the size of each joblog, 584k, is not near the maximum size.
From: MIDRANGE-L [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of CRPence
Sent: Thursday, August 14, 2014 1:14 PM
Subject: Re: Multiple joblogs being created for some jobs
On 14-Aug-2014 10:28 -0500, Steinmetz, Paul wrote:
Normally, only one joblog is created for a job.
FWiW, regarding the noted effect from *PRTWRAP setting for Job Message Queue Full Action (JOBMSGQFL) having exceeded the Job Message Queue Maximum Size (JOBMSGQMX):
Some jobs have multiple joblogs being created.
In one instance 159 joblogs were created for a single batch job, each
about 80 pages, or 584k.
The final joblog is 5,164 pages, 32,792k.
_Control Job Log Output (QMHCTLJL) API_
The Control Job Log Output (QMHCTLJL) API controls the production of a job log when the related job ends or when the job message queue becomes full and the print-wrap option is in effect for the job. The API can only influence the job log for the job in which it is used. The API can be used to control:
* The destination of the job log.
* The amount of message information written to the job log.
* The occurrence of messages in the job log.
To have an effect on the job log, the API must be called before the job ends. It can be called in an initial program for the job.
This API does not produce a job log; rather, the API captures the control information specified on the parameters and retains the information until job log production. The API also prepares the output files for job log production. When job log production occurs, such as at end of job, the control information and the prepared output files direct the job log to the output file.
If the API is not used, normal job log production occurs. That is, all messages in the job message queue for the job are written to a spooled file from which the job log can be printed. If the API is used, no spooled file is produced. Instead, the messages are written into one or two output files, depending upon the amount of information requested.
Once the API is used, the options selected remain in effect for the current job until the API is called again. Each time the API is used, the selected options can be changed. The options in effect when the job ends or when the job message queue becomes full are the ones used to produce the job log.
Given the data is in a file, a summary query grouping on the MsgId and counting the occurrences per message identifier is helpful to determine which messages are pervasive and review if those might best be eliminated; i.e. review of ~150 spooled joblogs is not nearly so simple as a COUNT aggregate in an SQL GROUP BY query, optionally with a HAVING clause and\or ORDER to limit the results to just the most common messages.
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe, or change list options,
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a moment to review the archives at http://archive.midrange.com/midrange-l.