MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » March 2014

Re: Starting Raid on 2nd Raid Card, adding 6 disks



fixed

Yes, you can do all that with the system up and running. I assume you are
adding a second raid set to ASP1, right?

STRSST
3. Work with disk units
2. Work with disk configuration
8. Work with device parity protection

Under 8. Work with device parity protection
1. Display disk configuration
2. Include unit in device parity protection
3. Start device parity protection - RAID 5
4. Start device parity protection - RAID 6
5. Start device parity protection - RAID 5 with hot spare
6. Start device parity protection - RAID 6 with hot spare
7. Select parity optimization

After you have the parity done

8. Work with device parity protection
2. Work with disk configuration
4. Add units to ASPs and balance data


Rob Berendt





Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact