Just my additional two cents - If you are trying to configure a Xerox Worklibrary
Center device, forget about the IBM web site and download the tools
Based on your model, you create a WSCST, and then use the command to
the device description using that WSCST.cheaper
You're even been able to customize the WSCST to pull from other paper
drawers when the iSeries is thinking it's printing from drawer 1. The best
part is being able to increase the font size a little to accommodate the
older recipients of various reports.
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Pat Barber
Sent: Wednesday, February 26, 2014 2:02 PM
To: Midrange Systems Technical Discussion
Subject: Re: Best way to configure a LAN printer
The first consideration is what model/make the printer is.
There are certain brands/models/etc that simply will not work using HPT.
You are then stuck with using Client Access emulation, which works for
IBM has provided a detailed list for several years on what will work and
what is suspect.
In the old days prior to ascii printers it was never a problem, but
meant more trouble to use.We
Lexmark,HP and Ricoh are always good examples on what might work.
Inkjets will work but are always difficult.
On 2/25/2014 7:46 PM, Mike Cunningham wrote:
I would be interesting in hearing what your preferred way to configure aLAN attached printer so it can be used from a power system running IBM i
7.1. I believe the three options I have seen are RMTOUTQ, PJL, and SNMP.
do all RMTOUTQ but it has been at least 3-4 years since we last considered
Thanks for any feedback
This mailing list archive is Copyright 1997-2015 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact