Re: IWS4032 STRPCO can only be run from a programmable workstation.

Thanks Rob, at this point I'm not sure what to do...I don't want a mess on my hands...but thanks for helping me out.

IBM says to figure out what jobs are generating the 3197's and I figured out that STRPASTHR is creating 3197'2 but IBM can't tell me why STRPASTHR is creating 3197's or how to make STRPASTHR create either 3179's or 3477's.

Frank



-----Original Message-----
From: rob <rob@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
Sent: Fri, Aug 30, 2013 3:25 pm
Subject: Re: IWS4032 STRPCO can only be run from a programmable workstation.


Try changing system value QAUTOVRT to 0 so you have to manually create
irtual sessions. If that doesn't stop them then rename the command
RTDEVDSP to CRTDEVDSPX. This command gets ran under the covers.
r, use a command exit point program. Whenever someone runs CRTDEVDSP and
pecifies a 3197 then automatically change it to a 3477.
f course, if you are set to 24x80 and try to connect to a 3477 I wonder
hat will happen...

ob Berendt
-
BM Certified System Administrator - IBM i 6.1
roup Dekko
ept 1600
ail to: 2505 Dekko Drive
Garrett, IN 46738
hip to: Dock 108
6928N 400E
Kendallville, IN 46755
ttp://www.dekko.com


From: fbocch2595@xxxxxxx
o: midrange-l@xxxxxxxxxxxx,
ate: 08/30/2013 03:07 PM
ubject: Re: IWS4032 STRPCO can only be run from a programmable
orkstation.
ent by: midrange-l-bounces@xxxxxxxxxxxx


ob, STRPCO runs fine with devtype 3179 and 3477 but I got a 3197 to run
TRPCO by changing the display setting to 27X132 - which I got from that
ink you sent...so thanks for that link!
But now...I have to figure out, if possible, how to stop 3197's from being
reated. Any ideas?
Thanks, Frank

-----Original Message-----
rom: rob <rob@xxxxxxxxx>
o: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>
ent: Fri, Aug 30, 2013 1:33 pm
ubject: Re: IWS4032 STRPCO can only be run from a programmable
orkstation.

really do not think it's because the device types are configuring as a
97. I think you're barking up the wrong tree. What device do you think
ey should configure as? What device type does it work from?
hen again, google says I'm all wet. Look at this
tp://archive.midrange.com/midrange-l/200108/msg01802.html
ob Berendt

M Certified System Administrator - IBM i 6.1
oup Dekko
pt 1600
il to: 2505 Dekko Drive
Garrett, IN 46738
ip to: Dock 108
6928N 400E
Kendallville, IN 46755
tp://www.dekko.com

rom: fbocch2595@xxxxxxx
: midrange-l@xxxxxxxxxxxx,
te: 08/30/2013 12:58 PM
bject: IWS4032 STRPCO can only be run from a programmable
rkstation.
nt by: midrange-l-bounces@xxxxxxxxxxxx

Folks, we're getting this msgw on 3197 devtypes only and since we're
ing to keep running STRPCO for now...is there any way I can stop
ADEV's from being created with the 3197 devtype?
anks, Frank

is is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
st
post a message email: MIDRANGE-L@xxxxxxxxxxxx
subscribe, unsubscribe, or change list options,
sit: http://lists.midrange.com/mailman/listinfo/midrange-l
email: MIDRANGE-L-request@xxxxxxxxxxxx
fore posting, please take a moment to review the archives
http://archive.midrange.com/midrange-l.
-
is is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
post a message email: MIDRANGE-L@xxxxxxxxxxxx
subscribe, unsubscribe, or change list options,
sit: http://lists.midrange.com/mailman/listinfo/midrange-l
email: MIDRANGE-L-request@xxxxxxxxxxxx
fore posting, please take a moment to review the archives
http://archive.midrange.com/midrange-l.