× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



*NONE for the password is not the issue, in this cause it is not a display file issue.
Since the sign on is bypassed and a program is called and not a display file.

iSeries Access 5250 functions as expected but when using TN5250 the auto sign on fails.

Here is the relevant code snippet:

if ( IP.Addr>=wkLowRF and IP.Addr<=wkHighRF )
or ( IP.Addr>=wkLowHD and IP.Addr<=wkHighHD );

peUser.Profile = 'SSLTST1';
peUser.Curlib = 'UTILLIB ';
peUser.Program = 'RFTELNET ';
peAutoSignOn = *ON;

else;
peAllowConn = *OFF;
endif;

I would have expected the connection to have been dropped but what I am seeing is the sign screen displayed with the user profile, current lib and program fields populated.

Again iSeries Access 5250 works just fine TN5250 does not.

date: Wed, 28 Aug 2013 17:00:00 +0000
from: Dan Kimmel <dkimmel@xxxxxxxxxxxxxxx>
subject: RE: QIBM_QTG_DEVINIT

CPF1118 indicates that the user profile whose name you're putting into the structure in your exit has password set to *NONE. *NONE isn't allowed ever for a display file.

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-
bounces@xxxxxxxxxxxx] On Behalf Of Monty G. James
Sent: Wednesday, August 28, 2013 10:11 AM
To: midrange-l@xxxxxxxxxxxx
Subject: QIBM_QTG_DEVINIT

Using a modified example from Scott (ISOTELIR4) I have registered a
exit program with this exit point, The code validates the IP and
device name:
If the validating passes sets the user profile, curlib initial program
and turn auto signon On.

All work as expected with iSeries Access.

If using TN5250 it failes by filling in the sign on screen with the
user profile, initial program and current lib and through a CPF1118 No
password associated with the user.

The target for me is to bypass the sign on screen and run the initial
program if the connection is from a predefined IP range and device.

Any help would be appreciated.

Monty G. James
iSeries/AS400 Administrator
[cid:image001.png@01CEA3D5.1C7F9D50]
Hobby Lobby Stores, Inc.
7707 SW 44th St
Oklahoma City, OK 73179
405-745-6274
monty.james@xxxxxxxxxxxxxx<mailto:monty.james@xxxxxxxxxxxxxx>


________________________________
This email message, including any attachment(s) is for the sole use of
the intended recipient(s) and may contain confidential information.
Any unauthorized review, use, disclosure or distribution is strictly
prohibited. If you are not the intended recipient, please immediately
contact the sender by email.

This email message, including any attachment(s) is for the sole use of the intended recipient(s) and may contain confidential information. Any unauthorized review, use, disclosure or distribution is strictly prohibited. If you are not the intended recipient, please immediately contact the sender by email.


As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.