× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



Hi Paul

Thanks, you have confirmed what I suspected.

I can think of a lot of good reasons for BRMS to do this, but my customer
is going to find it slightly inconvenient.

Maybe I can finally get them to think about a tape library.


On Wed, May 8, 2013 at 12:39 AM, Steinmetz, Paul <PSteinmetz@xxxxxxxxxx>wrote:

Tapes can easily be shared between systems, but the 1st system to use a
tape becomes the owner of that tape. That tape can then only be used by
that system. Once its expired, the ownership can change.
Also, you can only APPEND to tapes owned by that system.

I wanted to do same scenario, could be done, per IBM.
BRMS append rules below.

When you select *YES at the Append to media prompt, BRMS takes the
following steps to select the
volumes to append:
v When selecting volumes for media libraries, BRMS determines if the
last volume that is used
can also be used for the append operation. The media class is the
determining factor. When
selecting volumes for stand-alone drives, BRMS issues message BRM1472,
which nominates suitable
candidate volumes.
v BRMS selects an active volume with attributes that match those in the
appropriate media
policy. BRMS
uses the following to check if the volume is available for appending:
- Same media class
- Same storage location
- Same expiration date
- Owned by the requesting system
- Same move policy
- Same secure attribute
v

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx [mailto:
midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of rob@xxxxxxxxx
Sent: Tuesday, May 07, 2013 8:20 AM
To: Midrange Systems Technical Discussion
Subject: Re: BRMS sharing 1 tape between 2 systems

Jack's email seems to indicate that what BRMS is trying to do is to
communicate with the other system and ask it "are you done with all the
data on this tape? Like, is it expired? And, if so, may I use it on my
system?". I can see BRMS doing that.

If it's standalone, how do you share it between systems? Dynamic lpar I/O
move?

Can a virtual tape be used? If so, will a DUPMEDBRM support appending?
And, will it support appending to a tape also used by another system?

My guess is that you have two or more lpars. They don't fill up a single
tape each. You'd like to combine them together so that when you ship them
offsite you can minimize the number of tapes tied up in a
father/grandfather/etc situation. Interesting. Good luck. If you can't
figure it out open up a question pmr with IBM. If they tell you it's not
currently supported open up a DCR. Sounds reasonable. If anyone can keep
track of which tape contains which object from which system after all that,
it will be BRMS.


Rob Berendt
--
IBM Certified System Administrator - IBM i 6.1 Group Dekko Dept 1600 Mail
to: 2505 Dekko Drive
Garrett, IN 46738
Ship to: Dock 108
6928N 400E
Kendallville, IN 46755
http://www.dekko.com





From: Evan Harris <auctionitis@xxxxxxxxx>
To: Midrange Systems Technical Discussion <midrange-l@xxxxxxxxxxxx>,
Date: 05/07/2013 02:49 AM
Subject: BRMS sharing 1 tape between 2 systems
Sent by: midrange-l-bounces@xxxxxxxxxxxx



I'm working on a site running V7R1 TR6 that uses BRMS to manage their
backups. BRMS networking is set up and active and media can be seen
between
systems,

They have a scenario where they want to backup 2 guest partitions to a
single tape. They only have standalone tape drives available, no tape
library.

- The drive is available on the second system
- The media class is set to SHARE YES.
- The backup control group specifies APPEND *YES

Backups fails with message BRM1518 Volume xxx cannot be used on this
system.

Second level text provides additional information that "media management
indicates that the volume is not to be shared between systems" and
provides
details of the back on the first partition.

Is it actually possible to do what the customer wants to do ?

Is the "sharing" that BRMS does between systems limited to sharing common
media and tracking, but backups to be appended to a tape must be appended
to a tape already used by the same system ?

I can understand why this might be so, but would like to confirm one way
or
another. Any references to manuals or documentation would be appreciated.

--

Regards
Evan Harris
--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx
To subscribe, unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx
Before posting, please take a moment to review the archives
at http://archive.midrange.com/midrange-l.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Follow-Ups:
Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.