× The internal search function is temporarily non-functional. The current search engine is no longer viable and we are researching alternatives.
As a stop gap measure, we are using Google's custom search engine service.
If you know of an easy to use, open source, search engine ... please contact support@midrange.com.



No

-----Original Message-----
From: midrange-l-bounces@xxxxxxxxxxxx
[mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Wednesday, October 17, 2012 9:47 AM
To: Midrange Systems Technical Discussion
Subject: Re: connection issue

Are you using an exit program.

On Wed, Oct 17, 2012 at 9:43 AM, Jeff Elam <jelam@xxxxxxxxxxx> wrote:

Good morning,



I've had this issue before. I don't remember what I did to fix it
though. I have a laptop at a remote location. If I assign it IP
address
10.50.130.250
it will not connect to the system I (V6R1) using Client Access. If I
change the IP address to say 10.50.130.249 it connects to the system I
with no problems.



Using the IP address 10.50.130.250

I've tried the CWBPING and receive error CWBC01003 Socket error,
function connect <> returned 10060.

I can't ping the system I from the PC. I can't ping that address from
the system I either.

I've performed a tracert from the PC and I can see it connect to the
router at the remote location and the router at the location of the
System I then it times out.

I've performed a traceroute from the system I and it bombs immediately.



When I try to connect from the PC I can see a job in the TCP/IP
status area



10.50.130.250 50665 telnet 000:00:11 SYN-received



This job goes away after a short while.



If I perform the above with the 10.50.130.249 address everything works
fine.
I have multiple devices at this location that access the system I with
no issues.



The 250 address might have been used by another device at one point in
time.
It's almost like the system I is holding something from that
connection (mac address or something), not allowing the new device to
connect with that address.



The difference between the two IP addresses is one has full internet
access the other address is filtered through a website filtering
device. I've worked around the issue by opening up the 10.50.130.249
address to full internet access but I'm still curious as to what the issue
might be.







Thanks,



Jeff

--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing
list To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe,
unsubscribe, or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take
a moment to review the archives at
http://archive.midrange.com/midrange-l.


--
This is the Midrange Systems Technical Discussion (MIDRANGE-L) mailing list
To post a message email: MIDRANGE-L@xxxxxxxxxxxx To subscribe, unsubscribe,
or change list options,
visit: http://lists.midrange.com/mailman/listinfo/midrange-l
or email: MIDRANGE-L-request@xxxxxxxxxxxx Before posting, please take a
moment to review the archives at http://archive.midrange.com/midrange-l.





As an Amazon Associate we earn from qualifying purchases.

This thread ...

Replies:

Follow On AppleNews
Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2024 by midrange.com and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available on our policy page. If you have questions about this, please contact [javascript protected email address].

Operating expenses for this site are earned using the Amazon Associate program and Google Adsense.