MIDRANGE dot COM Mailing List Archive



Home » MIDRANGE-L » September 2012

Re: Unload/Reload



fixed

Rob,
No message shows in QSYSOPR but it does show in the log. It will show in CHKASPBAL as well.

Once down to the dregs then on i 7.1 you can go into service tools, work with disk units, work with removing units from configuration. From there select the correct units and they will be concurrently removed.

Next you'll want to exclude that device from RAID which unfortunately requires dedicated system (DST)

- Larry "DrFranken" Bolhuis

On 9/12/2012 11:36 AM, rob@xxxxxxxxx wrote:
Ok, I just ran
STRASPBAL TYPE(*ENDALC) UNIT(18)
CHKASPBAL
CPI18A3-Unit 18 is selected for end allocation
STRASPBAL TYPE(*MOVDTA) TIMLMT(*NOMAX) PRIORITY(*MEDIUM)
CHKASPBAL
CPI18A5-Balancing type *MOVDTA is active for ASP 1 with name *N.
Size % I/O Request Read Write Read Write %
Unit Type (M) Used Rqs Size (K) Rqs Rqs (K) (K) Busy
...
14 4327 70564 83.6 10.1 4.0 1.0 9.0 4.0 4.0 0
15 4327 70564 83.7 2.8 4.3 2.1 .6 4.0 5.3 0
16 4327 70564 83.7 .8 8.0 .6 .2 9.3 4.0 0
17 4327 70564 83.7 3.0 4.2 1.0 1.9 4.0 4.4 0
18 4327 70564 83.6 206.6 38.2 72.3 134.2 101.0 4.4 83

When that's done, I suspect I'll see a message in QSYSOPR. Also I'll see
that CHKASPBAL should say it's done. I think WRKDSKSTS will still show a
miniscule amount of data on it. To clear that last bit off is that
something I can do in SST or do I have to use DST?

WRKHDWRSC *STG
9=Work with resource
Resource Type-model Status Text
...
DD018 4327-070 Operational Disk Unit
7=Display resource detail
Resource name . . . . . . . : DD018
Text . . . . . . . . . . . . : Disk Unit
Type-model . . . . . . . . . : 4327-070
Serial number . . . . . . . : 21-015FF28
Part number . . . . . . . . : 42C0216
Location : U5787.001.DQD0C25-P2-D12

STRSST
3. Work with disk units
2. Work with disk configuration
12. Work with removing units from configuration
3. Remove units from configuration
2. Display status of remove operation
make sure it's done.
So far so good?

Then do I
1. Start a service tool
7. Hardware service manager
1. Packaging hardware resources (systems, frames, cards,...)
9=Hardware contained within package (on the 5787)
3=Concurrent maintenance on
Type- Resource
Description Model Name Location
Disk Unit 4327-070 P43 P2-D12
F9=Power off domain
Pull 70 out. Put 140 in.
F10=Power on domain
3. Work with disk units
2. Work with disk configuration
8. Work with device parity protection
2. Include unit in device parity protection
4. Add units to ASPs and balance data




Rob Berendt






Return to Archive home page | Return to MIDRANGE.COM home page

This mailing list archive is Copyright 1997-2014 by MIDRANGE dot COM and David Gibbs as a compilation work. Use of the archive is restricted to research of a business or technical nature. Any other uses are prohibited. Full details are available here. If you have questions about this, please contact