Re: Migrate twinax console to LAN console V5R2

Jack - this is opt 8 in V5R2:

8. Work with service tools user IDs

Which brings me here:

Work with Service Tools User IDs
System:
pe option, press Enter.
1=Create 2=Change password 3=Delete
4=Display 5=Enable 6=Disable
7=Change privileges 8=Change description

There is no option to set the console type. Is it somewhere else in V5R2?

Scott


-----Original Message-----
From:midrange-l-bounces@xxxxxxxxxxxx [mailto:midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Jack Kingsley
Sent: Monday, July 02, 2012 11:25 AM
To: Midrange Systems Technical Discussion
Subject: Re: Migrate twinax console to LAN console V5R2

start SST, take opiton 8 (Work with service tools user IDs and Devices),
can you do anything with option 3 that would allow you to change it to lan
console.



On Mon, Jul 2, 2012 at 12:17 PM, Lindstrom, Scott R.<
Scott.Lindstrom@xxxxxxxxxxxxxx> wrote:

> Sorry - that link was valid before. It is a PDF document that gives the
> steps to do this V5R4M5 and beyond.
>
> Scott
>
>
> -----Original Message-----
> From:midrange-l-bounces@xxxxxxxxxxxx [mailto:
> midrange-l-bounces@xxxxxxxxxxxx] On Behalf Of Lindstrom, Scott R.
> Sent: Monday, July 02, 2012 11:16 AM
> To:MIDRANGE-L@xxxxxxxxxxxx
> Subject: Migrate twinax console to LAN console V5R2
>
> I have a V5R2 system that I need to get over to LAN console so we can add
> some LPAR's. I found this document:
>
>
> http://www-01.ibm.com/support/docview.wss?uid=nas179a308457dd4c6c18625770e0057530f
>
> But it covers V5R4M5 and beyond; it directs you into SST option 8 "user
> IDs and*devices*" to set the console type to '3' Ops Console. In V5R2 the
> 'devices' part is not there.
>
> Does anyone know how I change the console type from Twinax to Ops LAN
> console in V5R2?
>
> Scott Lindstrom
>
> --